Yarb
Subscriber
-
Joined
-
Last visited
Everything posted by Yarb
-
4351A is what I ordered. Guess I’ll have extra washers.
-
Should be here Friday. Coming out of one of the dist. Whse in Tx. McMaster Car order came in yesterday. $26 with shipping. Think I pulled the trigger way to soon. I’ll post pics of both when I pick up the Nissan washers.
-
Ordered a set from my local Nissan dealer yesterday.
-
Put in an order from Mc Master
-
Very Nice! How much are those toda? Shipping and installation had to be a big part of the cost.
-
Hopefully you noticed when removing the old seal that the seal is shall I say inverted. Meaning you drive it in upside down from the outside of the cover. Hope that makes sense. I used Permatex Anaerobic sealant on the gasket per @dave wm recommendation. Worked fine for me.
-
These Old Girls are Tired and need some love. Great work friend!
-
-
-
What was OER’s response that you received 2 weeks later? Thanks -
Looks like the valence.
-
Could it possibly be the male latch on the hood itself somehow being misaligned?
-
Running a stock motor anything over 40 is too large IMO. You are talking 150bhp.
-
Would be very interested to hear the negative feedback on The OER carburetors. When you reference DSI are you speaking of Datsun Spirit in Manassas Va.
-
You haven’t mentioned from what I see information on the engine you are working with.
-
Incredible work friend
-
-
Hey Cliff is that the Ole rubber orange on fishing line to mark your spot in the garage!!
-
-
I would say lay it out in the Sun but I see you’re from Indiana. Probably not the best time of the year.
-
Beautiful Work there friend!!
-
The camera will give you a better idea for many parts of the car including the radiator support and front rails as well. Once you find an area that looks satisfactory Eastwood makes a product to coat those areas with an extension nozzle to reach deep inside.
-
Free returns although I’d have to do the math to see how much greater voltage drop you would be getting going to the coil. That would be a @SteveJquestion.
-
My lower brackets on the same louvre you have are reversed where they are hidden underneath. I guess it was a tech preference for whoever did the original install back in the day.
-
Do yourself a big favor and get the Nidage Borescope from Amazon for less than $30 and look up inside the frame rails through the drain ports. You might be surprised by what you find. Also take a screw driver and tap along the bottom frame rail and see if you find soft spots. It’s a blue tooth setup that’s pretty cool. At least you can see what you have to work with.
