Everything posted by Patto
-
240Z Wallpaper
This is my current wallpaper... I advise you be like me and right click this large image and select 'set as background' Good clean space to put icons too. For more tips on being like me see my book "543 Ways to be Less Like You!" available at all low self-esteem bookstores.
-
High and Mighty
The timber edge of a loading ramp frames the 240Z. Note slightly bent apron where wrong hook was used for tow... bugger.
-
1971 240Z
I like this shot... a bit out of focus and on a tilt, gives an interesting contrast with the tuscan carriage.
-
A Moving Experience...
A Moving Experience indeed. This Bedford Van is apparently a former race car transporter. These days it is stored and being vandalised.... would be great transport if you had a Le Mans spec 240Z!
-
A Bedford's eye view
-
Action Shot
-
Action Shot
Bit of an action shot... myself piloting the Z, Adrian behind the camera focused in on the background, with a nice blur resulting.
-
1971 240Z
-
Z and Bedford Van
My 1971 240Z and a Bedford removals van rumored to have previously been a race car transporter. Shot through the window of a guard's van.
-
1971 240Z
-
1971 240Z
-
1971 240Z
Great light reflection on the Z's curves. Those skies are not the work of a lense or paintshop either.... a duststorm hit town earlier that day.
-
Magnums
-
Magnums
-
Locomotion
More than one set of wheels in this shot. Can I also mention that all 240Z's should have headlight covers. Thank you.
-
Looking down the badge
- 1971 240Z
-
1971 240Z
One of my fave shots from this shoot... the light catches the metallic side of the Z as it sits in front of a massive articulated steam locomotive at Kingston yards
-
Halo
-
1971 240Z
-
1971 240Z
-
1971 240Z
The Z after a rare polish! I tend not to bother as it usually gets rained on the next day... or a dust storm as in this case. The weatherman must hate me.
-
Datsun Badge
-
'71 240Z (ex Alfadog!)
-
Body parts needed
I think the cost of freight from the USA may be prohibative. Could anyone clarify weither I could use 260z parts (particularly off a 2+2)? Apart from the obvious differences with the indicators etc is there any variation in sizes or mountings?