260Zed

Initially I thought it might be a goggomobil dart . But it's wheel arches are way too high. I'm thinking maybe a 50's Jag XKSS

I read the whole 10ish pages (phew). Had me sold till the guy who showed his results was able to scratch it back to bare metal. If it works I think it needs more clarification. Eg Exact branding to use, with what solvent, at what ratio. But yeah, cheap way to get some colour on your car. I think I'd wait till lotsa people can vouch its success. 2c

I dunno, You sure thats a pic of down under? Cause we don't get a lot of earthquakes here... and thats one hell of a fault line. Wonder if the poor blokes alive?

Man thats no good. I can sympathise. I've got a re-constructed left knee, and a right one that dislocates regularly. And im only 24, so I've got plenty of arthritis to look forward to! You'll be right, it freakin hurts tho. Play the sympathy card as much as you can! Luke

Having an awesome bbq, on the balcony. The sun is hot and the beer is cold. Everything is as it should be! :laugh:

Whoops my mistake

For $4k US to transport, plus the sale of the car, I'd sell it and try and find one here. There aren't loads around the place but if you contact a club and keep your ear to the ground I'm sure you'll find a good one eventually. Where abouts in aus are you headed? Luke

Hey, IF your parting it out, and the quarters are as good as you say, id be interested in the RH... PM me if your interested. Cheers Luke

Great write up by Jeremy! I vote to move it to tech articles.

Very jealous. Bet you came home with a few extra ideas!

Are you sure there is a problem? I mean my oil pressure reads fairly low (just above lower mark) when at idle and V low speeds, and will only go to the high mark when I'm really giving it the boot. Does the guage move at all? Also check sender as earlier described. Good luck Luke

I agree, I tried brushing it on my aluminium rims after they were polished and ended up stripping it all off and doing the job again after I was not happy with the bubbles in the finish. I'm sure the product is great. But next time ill be spraying it. Luke

Yup, as long as it's the same as ur nephews buddys uncles mate's. (eg 2 seater or 2+2).

Rob Bliss?

It's prolly a regional difference between AUS and US. The 83 280zx I used to own had the F54/N42 setup stock. Luke

I'd try it primed, then at least you know if it works at all. Luke

Yeah, there is a difference. I wasnt able to use a 240 regulator when I had to replace mine. Ended up getting the correct one through warren at allzparts. Cheers Luke

"oils ain't oils." I'd agree that if you use the one brand/type of oil that it is more beneficial than trying every one after another. depending on your climate I would've chosen something a bit thicker, but it depends on your engine condition etc...

, that's cool. Wonder how many they sold

Arms and legs seem to be the going rate for most 1st gen parts

After checking/replacing coil, ignition module would be next on my list...

That is one hell of a first car! Sounds like you got a great deal, as long as it goes as well as it looks. For god's sake don't wrap it around a tree! Luke

When I was changing my tacho around (swapping guts and keeping original face etc) I used a two wire one from a 240k (I think) and it had a red/orange needle originally, although it was quite a bit smaller from memory and would have looked a little wierd on the original 240z face. Maybe someone's been playing swapsies with yours too? But no, no zeds I've seen have had that. FWIW Luke

Yeah, I was looking at the one Alan had too. Not that I have spoken to anyone that has actually fitted it, but would there not be a lot more vibration passed on the the body of the car? A lot louder etc? Would'nt mind knowing what you end up choosing though...

Don't be too upset Datto-Zed. The way I see it the datto is still there, the tree it hit isn't. Datto=1 Tree=0