240Zdragon72

Is JB Weld better than Fiberglass Resin? Because, I have a whole bucket full of the Resin and I have never used JB.

Thanks for your help guys. Looks like it's a trip downtown to ACE and find some new Hardware! Dosen't hurt to ask. :rambo:

Today I was pulling off the headlight extensions and the hardware was rusted. Using a 8mm wrench to get the nuts off, they snapped the stems off. Found out that these extensions were made out of fiberglass. The stems are metal and the look like they were just "pressed" into the part. Does Nissan still make the stems for the bezals or will they have to be fabbed from the hardware store? Thanks :tapemouth

I was just on MSA looking at the new cams. I'll have to buy 2 new ones. One for the Non-Turbo engine and one for the Turbo engine. Tried to get out of buying a new one, but the turbo needs it BAD! (The Doofus left the valve cover off it for sometime.) Thanks for all your help Carl.

I don't remember seeing any on them. What if there is? New Cam? I'll have to go home tonight and post a pic for you Carl. It will be a PM.

The Z is done, I will have to put some more pics up later.

Found all the hardware for the cam. Everything has a lot of surface rust on it. What can I do to clean them up? Any house hold cleaners work well?

Thanks. I have tried to B-1/2 the vents to the hood. They started to peal back within a week. Hopefully you will be able to find them Blake01. Thanks everyone for your help.

Did you get yours through wizard? The company was on E-bay were I got mine. Trying to make #3 button open the hatch.

Outbidded on vents everytime. :tapemouth Would there be a way to weld some studs on?

I am selling these doors. If anyone wants them please PM me or E-mail me. asking $150.00 for both or make an offer. Thanks :rambo:

Thanks 26th-Z, It was hard to navagate the website, but I will have to look later.

I would like to replace the black rubber that comes with the MSA headlight covers. I read in a post not too long ago (can't find it now) that if you go to Auto Zone and pick up some chrome door edge protector, it may be rigged to fit. I would like to know if it will work. Thanks.

Thanks for the post, Will. I will start ordering mine during the new year. (Wife already got me stuff for Christmas.)

I use MSA, VB, E-Bay, and the local Z yard. Here lately, e-bay has been sucking for air flow meters. Seems like all they have are non turbo or '83 turbo ones. Just my luck, there will be an '81 turbo that I need, but I wont have the money for it. :mad: :tapemouth Thats life...

The steering coupler is mine. Had to replace the old rubber one with the urithane one from Victoria British. Spent about 3 hours on it because I had put it back together wrong! :stupid: :stupid:

I take it back about the wires! Tonight I noticed the car was running really sluggish. I don't remember if it was this post or not, but someone said that the Taylor wires he was using were "shorting out" to his cylinder head. I decided to check it out on mine. It was doing the same thing. I could see the blue sparks were the wire boots meet to the plugs. So, I was woundering what the part numbers for the MSD, NGK and Magnacore wires were. Thanks

I like the R34 Nur V-Spec II. My altime favorite is the Skyline 2000. I like the oil cooler on the front of the car (not for street use, I supose ).

Thanks Tommo, hopefully it is only the front end needing new bushings!

Sorry for the loss, man. I just recently got some tail lights off e-bay about a week and a half ago. Might have got me also! :tapemouth :tapemouth