Fun_in_my_z

""".... Where in the chain of events DO you have gas flowing??? Can you pull gas from the tank to the fuel pump inlet side? Can you blow air back through the supply tube into the tank?? Fuel pump: With the engine turning over on the starter put your finger over the "inlet" (look at the arrows 1 inny 1 outty) and see if that little sucker is sucking your finger tight to the tube. Now try the output tube. You should feel pressure against you finger. Just in case you have the lines reversed because the orientation of the new pump might be different this is also a good check to tell which is IN and which is OUT. This should NOT be this difficult!!!""" Provided you have two peaple.(or very long arms)

Look at the car. If its not somthing you would need to use daily or anytime in the near future? If not then do you have the time, patience and know how to do it. Most likely you will have to do a full restoration to evan get it drivable. If its somthing you can tackle then go for it. If not then their are other Zs around you just have to look in the right places. It is possible to do. There is this saying-If man built it then man can rebuild it. Ps. somthing else to check is the brakes. Now on this car i donno how long its been sitting but mines been sitting since 95 (before i got it) and has no brakes at all. Just somthing else for you to look into.

Not to be rude or to try and call you domb. But i have seen cases like this before that the vehicle didnt have any gas in it. Does your?

Same here

Sorry zvoiture. I didnt mean that at you personally.I guess i did word that wrong huh. sorry man no hard feelings i hope.

Yeah thats how you spell it.

Look dude you dont have to be driving fast to enjoy a corner. The one i was talikng about i havent taken it faster then 35. the limit is 45. A loser is a guy that points this kinda stuff out. ie. you! We have a life behind the wheel of our cars. Nobody said they where exeptional drivers. But if having fun makes a person a loser then what the hell is wrong with it?

Same here brother.

I have found a full set near here. The guy put em on a 260z. This car has no trans no interior no floor pans. He was rebuilding it then he got tired of it. has a strong running 128 FI engine. I was sirusly considering buying this for parts (the body is shot) But $500 is out of my price range.

Whens the last time you cleaned the tank? There could be somthing blocking it up. Is air coming through the line from the tank to the cabs? Could be stopped up fuel line.

There is a corner about five miles from here.Its one of those that doesnt apear to be that sharp. Its only about 45 degrees,but its a long sweeper with reversed banking. Many peaple have been killed in that corner....just the other day a friend of mine lost his 1974 or 75 porche turbo straight off the side into the woods. He wasnt injured but hes down to eight lives!

The only thing i can think of would be other Zs. Like a V8. Zwrencher...dont feel bad this is what i started with. http://www.classiczcars.com/photopost/showphoto.php?photo=8788&password=&sort=7&thecat=500 Not to many Zs left in Arkansas to much water.

Least it was a zx. :sick:

Hey if the shoe fitsROFL I was changing tail light lenses in a 95 Dodge caravan when i got wasp stung. I know this doesnt sound bad at all, but i have anaflaxes.(sirus alergic reactions to stings bites ec..) Made for a night in the er.

yeah what Carl said!

When i was thinking of doing it. It was going to be one of those "for the hell of it projects"

Dang it Mike thats what i was going to say! Switches from 76 datsun trucks will change with a 240.

Awwww sweet revenge!

Its like a grab handle. Ill get a pic asap.

I was digging around in my car today and found this strap. Its connected to the seat belt clip on the drivers side. Its about 6 inches long give or take. Reasinbles a chicken strap but it seems kinda strange to have that near the driver. Thanks Bill

Just dont let you ex near it!

Im in the middle of rebuilding a L26 with round tops. Im going to stay Datsun with my Datsun. Ive got a 82 or 83 model zx 5 speed for it to.

That thing is meesed up....i got i 130

The peaple that do this sort of thing are so wastefull. I have access to a rx7 with the rotory, I was thinking about putting it in my 71. But i dont know anything about em.

There is a 350z in the AZCC. The 350z has a bar that runs across the strut tower in the back he had it rigged in the middle of that. It looked ok. Would have looked better in a s30. How hard would it be to put one back there? Im not going to try this anytime soon. Just a thought.