webdawg1

actually Zs-ondabrain did not have anything to do with resurrecting the mod...per se...... I think I kind of brought it back into the limelight so-to-speak when I was asking for all the measurements so I can get a SolidWorks drawing (CAD drawing) made up...so I can get a R/T mount made up for myself...and if I can ever get the freaking CAD drawing made...(here shortly I hope) may/might be a 3rd source for the R/T mount...at some point here in the near future... webdawg1

You did not mention anything related to the fuel filter up in the engine compartment...How long has it been in the car..?? Could very well have some "Crud" in the fuel tank also...would probably start with the fuel filter first tho...and see how much difference it makes...after it is installed... webdawg1

Zs-ondabrain, Original intention was to make one up for myself :stupid:...which is why I was asking for all the dimensions...as I kind of came up on the very end of that last group buy thing you hosted...probably be a week or so before I even have the Solidworks drawing (CAD drawing) in hand...how many folks we talking about..?? Once I get the drawing in hand and talk with the metal shop here local...I can get a better idea of what it would cost...etc...etc. webdawg1

Bonzi Lon, You da man... Got some folks currently working on a Solidworks drawing for the R/T mount as we speak...so I can take it by the metal shop for them to make reference to...etc...etc. One more question...when you say "50mm from the bottom edge"...you are making reference to what would be considered the rear of the mount (where the plate is welded in on the bottom) webdawg1

Anybody out there in Z land still have their R/T mount not installed yet...Looking for the measurement for the hole on the top from the right edge (see attachment) and the center to center measurement of the three holes on the side (see attachment) webdawg1

sblake01, If it's any help...here's a url for a website that I use every once in a while to drop off a large file (up to 300 mb) Takes about 60 seconds or so to set up a free account...http://www.sendspace.com/ webdawg1

12mm x 1.25 x 40mm webdawg1

and picture of transmission mount... webdawg1

This picture help you any at all..?? Looks to me like the "Sloped" part faces to the front...so in other words...in the picture the front would be to the top right as viewed from the passenger side of transmission... webdawg1

Arne, Yep...I agree on that point...just trying to give hime an extra option if he decides he wants to go that route... webdawg1

Check out the following eBay auction... http://cgi.ebay.com/ebaymotors/Datsun-Plug-Wire-Holder-Bracket-Set-240Z-280Z-280ZX-NEW_W0QQitemZ310211020224QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item483a0485c0 webdawg1

gas4765, Naw...you're ok with your post. Just thought I was loosing my mind or something... (A.K.A - Brainfart) because I remember uploading a couple of reference pictures along with the reply to your question... webdawg1

sblake01, Think I know what's going on with the link thing. I was using "Opera" when I answered that post...seems like when you do a copy/paste when using Opera it does not do the url the right way and make it a clickable link...just happen to notice that...if done under IE it does it correctly... webdawg1

I thought I had answered this the other day...so asking same question over again...eh...thought I was loosing my mind there for a second... http://www.classiczcars.com/forums/showthread.php?p=322135#post322135 webdawg1

Hmmm...you think that is expensive...check out the 007 flaring tool from FedHill...http://store.fedhillusa.com/flaringtools.aspx About $329.00 - $359.00...depending on which dies you get with it... webdawg1

Well...you could always get a set from you local Napa, Sears & Roebuck, Walmart, Kamart or local automotive parts store...Probably run you about $40.00 - $60.00... webdawg1

How about ordering another one of the hoses like you just got...or try part number A4056-23001...should fit on the bottom end of that line...as it has big end...little end... webdawg1

Here ya go...a picture is worth a thousand words...or so I've been told... webdawg1

Should be able to order you a couple from your local Nissan dealer...or other part source of your choice...Part number: 17342-18000 webdawg1

could be wrong...but I think he is making reference to either part #53 or #59... #59 is part number...14056-23001 #53 is part number...14055-N1400 webdawg1

agree with zKars...6mm x 1.0 x 15mm...just happen to have them sitting right here on the desk... webdawg1

Ron, what you talking about (ignore list...??) Just trying to help out...man... webdawg1

LBO730, This might help you out some...see attached GIF file... webdawg1

hmmm...I'm showing that as item #11 Part number #18124-73000 (I've got a 75 280Z) Got some not long ago from local Nissan dealer with that part number...You go in with part number in hand...makes their day... webdawg1

Here's a PDF of that process...to place in your archives...or for anybody else that wants a ready reference for down the road... webdawg1 U-Joint Tech Tip.pdf