mriz

Thanks for the info. I just downloaded and will look at tomorrow night at work. I'm sure it will help ,I just don't have any background in electronics.

I work for a radiology group as an MRI technologist ,hence the lack of imagination for a screen name. I think my dogs bored with it by the look on his face.

Thanks, I'm on my way.

I had a similar experience and it turned out that the steel belts had shifted inside the tire ,which had plenty of tread.

Does anyone know of a beginner automotive electronic testing book that contains info on how to use a multimeter to test and diagnose? I know the theory but have no practical knowledge yet.

If you do go with a polishing compound and wheel be real careful of heat build up. Laminated glass is not too tolerant of heat and pressure on a small area. I did try it on my 82ZX when I worked at a glass shop. the pits are usually too deep to polish out, changed out windshield in the end.

I don't need the engine , but the 280 does intrest me. I have a 1977 coup and might need some odds and ends. Is the interior o.k? I only live in Seymour and work in fairfield. If possible I could stop by on the way home depending on your schedule. E-mail would not deliver . My e-mail is jemurphy12@snet.net. Thanks.

Just got back from vacation, Yes I am using omni system mp170 epoxy then mp 282 high build, sand then basecoat/clear. Weather has not cooperated as of yet and gun wound up on backorder. Hopfully gun shows up by thursday and I can get started. Thanks for responses.

Thanks guys, I hopefully wash and paint this weekend.

If the weather will allow I'll paint next weekend. I do have surface rust due to the amount of time it took to strip to bare metal. Can I just sand then prep or will this rust return to haunt me?

Paint it whatever color you like. I'm about to hit 45 and they keep saying that i'm in a mid life crisis for buying the Z. I remind them spending all the time welding, sanding ,and staring at the floor in dispair for hours at a time is not a midlife crisis .And how the hell do they know if i'm half done with my life anyway! Besides a color change will allow you to find anything that needs to be fixed. Just look at my gallery to see my suprises. looking to paint a color close to that of Blitzkraig Z car.

I need to remove the exterior door handles from my 1977Z and do not see where they disconnect. The bolts are off along with the inside panel ,but where the rod comes down to the latch mechanism is where I am stuck. I don't want to break any small parts. Thanks.

I noticed this ad this morning in our newspaper. It reads 1972 240Z attention all Z lovers. running condition , brown for sale whole or parts, needsnew owner and tlc. garaged $900 or best offer. Even though I have a 77 280 I'll have to admit I'm tempted! The phone # is (203)382-0305. This is in Connecticut and the first I have seen in the paper for a long time. If anyone is serious in the car and not just curious I will try and help if I can.

Here goes , My name is Jim I am 44 yrs old and an MRI technologist for a radiology group . I am married with 2 stepchildren and we have an 8 year old girl together and a labrador ( if he only had thumbs). back in the mid 1980's I drove a 1979zx and 1982 zx along with several motorcycles. Had to sell the 82 when I got married and finally decided it was long enough without one. It will take alot of work which I am new to but the advice I have gotten off this website from you guys has has made this progect go a bit easier. And Escalon the longer the post the better espically when it comes to bodywork. Thanks

When replacing the dog leg I found out the half the fender well was fabircated out of filler along with a large plug of it in the rocker panel. Not happy but o.k. i'll deal with it.Then went on to stripping the paint from the lock side of the door only to discover a hole (once the filler was removed). This one is going to take some thought to fix. Put that one aside and unpacked rear quarter patch panel to find it does not fit this car! Thought it best not to lift up carpets tonight. Called it a night and decided to check out some of the finished Z cars on the site. Thanks , just thought I'd share.

Thanks for the info. You guys always have the answers to the problems the books don't mention. When I got the dogleg off the rust haden't made it to the inner steel yet. I did have to remove the entire dog leg to do it right . Not fun at all getting to those spot welds. Flat chisel and box of bandaids. Only the bottom around the wheel area needs attention. Should be able to weld up the rocker and dogleg next weekend. Thanks again

I am going to try a plastic primer by rustolium then cover it with a satin or flat finish . Hopfully this keeps the paint from cracking. It may not be the best fix but if it's the worst let me know.

Does anyone have any advice on how to get the back of the rocker panel out of the dog leg? Or plan B , cut it off even and weld? Thanks

It's the piece just above the rear bumper and below the tail lights on the 77 z . The manual called it a " sight shield " probably because it covers the gap between the bumper and the rear of the car? I just don't want to damage this taking it off .This is my first time doing a restore so half the battle is just explaining the question. Thanks