44014

gees you blokes make it sound hard you can do it in about 3 hours if you get your finger out just put the front wheels up on some ramps and start ripping $^!# off...!

shut up jake...! just put a rb20 in and save me alot of head aches matt:stupid:

Where in Aus are you? Have you got any pics of the flares, i know a few people who would be very interested

pull all your elecrtical plugs off clean them and put them back on using a bit of grease or somthing when you put them back in should help cheers doug

thats not uncomman for a zed not to run when cold my car wont idle until i get it up to temp and is a bastard to start cold and so does my mates 2+2 so dont worry about it to much and yere make sure you do the points and you have to keep them up to a zed.. cheers doug

dude if you need a diagram to show you the path for a zed belt you shoulnt be looking under the bonnet of your car and the air pump just take it off cheers doug

yes it is a p90 running a f54 block tripple 45mm webbers extractors i think its about 2 1/4 2 1/2 inch exaust on it standard crank running 200b flat top pistons other than that its a mystery matt just put a rb20 in it cheers doug

here here get that boy some hitachis

did you check out her other add quite disturbing but funny at the same time http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4111290352&category=67728#ebayphotohosting her wedding ring

almost uses as much fuel as my zedROFL

SOLD PPL thanks for the ummmmm replies to my add:stupid:

ok well the car im putting the motor in is an auto so is that differant is it...? the actual flange is the same the problem im having is e30 seems to have it further forward than the n36 so if tryed really hard i could probly flex the mountings enough to make it go on but i was just wondering if there is a differance or the exhause has bee bent or somthing ...?

does any one know the differance between exhaust headers i have a l26 i am putting in a 74 2+2the l26 was fitted to a 73 240 the l26 i pulled out of the 240 has e30 cast onto them and the ones of the 2+2 have n36 cast on them does any one know the differance because i cant seem to get the exhast onto the e30 manifold so b4 i go pullevery thing off is there a differance anyone...? doug