auxilary

bump

half of these parts are from a parts car that was used for autocross, and had a lot of spare components to go with it. Prefer local pickup, but if you wish to ship, shipping cost is extra. All parts are considered used unless otherwise noted. These are located in Fremont, California, zip 94539 Please refer to the directory below for pictures: http://www.datsunracing.com/forsale -stock points type distributor housing - $5 -electronic distributor with somewhat worn cap from what apprears to be a 280z. part # shown in pic - $25. -headbolt kit, couple of bolts have slight pitting. Comes with pump filter and sender. - make offer -Couple of oil pumps, condition unknown - $10 each -unknown pair of springs, length shown, no idea what these are from. $10 pair -2 thermostat housings, one complete assembly with sender from 280, just top water inlet is from 240. -240/60/80 alternator, dirty, but I think it works. Free -240z nissan/hitachi factory AC pump. Came off a working Z, comes with special block bracket and AC pump adjustment bracket - $70. This item is about 30 lbs, if you want it shipped it will probably be expensive -stock 240z gas tank, good shape, no rust. Needs to be boiled and recoated, should be good to go. Make offer -white 15x6.5" 5 spoke rims with silver lip, i forgot the name of the manufacturer. fits standard datsun/240sx bolt pattern of 4x114.3 , these have about 10mm positive offset. Condition is fair, very mild curb rash, some stains that can be cleaned off with industrial cleaners. $150 for all 4 with a set of generic 195/60/15 tires that have about 8-10k miles left on them with a set of 16 new acorn lugnuts. Local Pickup only -5 speed from JoeInCa's '77 280z. High miles, 5th gear synchro is worn so it will grind going into 5th or pop out of it. Needs rebuild, otherwise first 4 gears work just fine. Local pickup only -280z radiator. There's a dent on the bottom, but because it's from an auto radiator, the dent is in the transmission cooler tank, and does not affect water flow at all. I've been running this radiator for a year and a half with no problems. Comes with relatively new rad. cap. - make offer -plastic radiator/fan shroud, keeps the traffic cooling issue at bay. $20. Any questions, please email aux@highrpm.org

before I start disassembling it (again) this weekend more pics here in my gallery: http://www.datsunracing.com/gallery/view_album.php?set_albumName=2003-10-18zpics feel free to check out the full gallery as well: http://www.datsunracing.com/gallery/ -alex

shoot, no? didn't even know about it. Shoot me an email?

half of these parts are from a parts car that was used for autocross, and had a lot of spare components to go with it. Prefer local pickup, but if you wish to ship, shipping cost is extra. All parts are considered used unless otherwise noted. These are located in Fremont, California, zip 94539 Please refer to the directory below for pictures: http://www.datsunracing.com/forsale -2 pairs of stock front sumitomo brake calipers - $10 a pair. condition unknown -stock points type distributor housing - $5 -electronic distributor with somewhat worn cap from what apprears to be a 280z. part # shown in pic - $25. pending sale -single carb spacer - free or in the trash it goes -240z single crank pulley, casting numbers shown in picture - $10 -280z driveshaft - came off a 5 speed Z w/ r200 - $40 obo -240z driveshaft - $40 obo -Edelbrock RPM series 5501 freeflowing muffler. 2.25" in/out, almost brand new, used for 20 minutes, in box. - $60 shipped pending sale -headbolt kit, couple of bolts have slight pitting. Comes with pump filter and sender. - make offer -Couple of oil pumps, condition unknown - $10 each pending sale -used MSA solid differential mount, I will include spare mounting bolts - $25 shipped. -unknown pair of springs, length shown, no idea what these are from. $10 pair -2 thermostat housings, one complete assembly with sender from 280, just top water inlet is from 240. -240/60/80 alternator, dirty, but I think it works. $15 -240z nissan/hitachi factory AC pump. Came off a working Z, comes with special block bracket and AC pump adjustment bracket - $70. This item is about 30 lbs, if you want it shipped it will probably be expensive -stock 4 speed Z transmission. Excellent working condition, came out of my car a month ago - $50 Any questions, please email aux@highrpm.org

check your PM

it's been done, but people didn't swap in just the diff, but the complete irs = from brake calipers to half shafts. major fabrication required, you may want search for scottie gnz's info on hybridz. he successfully installed this.

as of right now it's spoken for. if the buyer flakes, i;ll let you know

this has been sold more pics here: http://www.datsunracing.com/forsale/rollbar/ i bought an autopower unit, so i have no need for this. it's used, off an auto-x parts car, no mounting hardware (no bolts, no plates to mount it in the wheel wells, but $10-15 in parts at a hardware store should be enough to get you going). the bar ties into the strut towers, bolts to the 2 out of the 3 bolts holding the strut isolator in on each side. The other tie in points are wheel wells like the autopower rollbar. I'll get pics later, local pickup (bay area, california) only please, it'll cost about 50 bucks to ship freight, and it's not worth it for the bar and trouble. There's very light surface rust on the few spots where paint rubbed through, but sandpaper and krylon will do a quick fix.

nope, not flaring out my car.. yet, anyway.

http://www.hybridz.org/phpBB2/viewtopic.php?t=25755&start=0&postdays=0&postorder=asc&highlight=

www.datsunracing.com/images/forsale <--contains more pictures $50 - condition unknown, came out of parts car. shfiter and mount not included, the transmission is located in bay area, california. local pickup only, please email dsmithgns@comcast.net or aux@highrpm.org

if you wanna get technical, the front driver's spring on the 240z is 1/2" longer than the driver's side

the 280z crossmember differs slightly, but will bolt in directly to a 240z. it's a little beefier than the 240 one

rebuilt tokico unit from partsamerica.com with lifetime warranty and core refund - 50 bucks.