azcarbum

I can only hope!!....... There is still so much to do. When is Canby??

After 2 yrs of putting all other projects ahead of my own, I've finally began to assemble my engine. I started with a JCR Supercharger setup I purchased from 1TuffZ. In working out the plans for my setup, I came to the conclusion that i wanted to use the best of today's technology in the build. So this ment alot of special, and custom items were going to be needed.......So below is what I have done so far. Custom SC Cam grind from with Paul Rushman's help, via Rebello Racing. Kameari Twin Gear Timing kit. Custom JDM Tensioner ( kameari Twin Gear setup. ) Kameari 1.0mm Headgasket Kameari ReInforced Engine mounts Kameari Fully Adj. Cam Gear Kameari Valve Cover Kameari (Mech. ) Oil pressure gauge JDM Valve Cover Studs JCR Modified Intake for Port Injection & Manifold Intake Air Sensor CNC Injector holders Individual Steel Braided lines to each Injector 440cc Injectors Modified TB from a Mustang *( 7th Injector to cool/Lubricate SC. ) WOLF3D -Engine Management System ( via Ron Tyler ) J & S Safegaurd System ( Individual Cyl. Knock control System ) Individual Coilpack setup ( via Ron Tyler ) Modified Infrared 300zx Dist. ( via Ron Tyler ) Oil cooler setup ( not installed yet ) Ceramic Heated ( not installed yet ) JDM Oil Temp Sensor Today I started to assemble and test fit things. It's been to long not playing with my own toy's!!...... With any luck, I may actually get it on the road this summer

Thank you guy's for the kind words, much appreciated.

If anyone is interested, I can get the chromed Trimmed REPRO Covers from japan. Roughly $375 with shipping and dollar conversion. If anyone is intersted, I'd have to contact my source and find out if he has any. You can PM me if interested.

thanks, much appreciated.

Just as another example of the ZX Gnose ( S130 ). Here is a actual item purchased by a hybridZ member a few weeks ago when he was in Japan. He had to cut it in half to get it shipped back to the states. (ouch!). As I siad, the S30 G-nose I believe is also a one-piece unit just like this one.

What information I have, show's the kit to be a 3 piece fiberglass. S30 -240ZG Kit specifications: G nose/over fender/rear spoiler . So it looks to be a complete one piece G-nose like the S130.

I'm looking into that with MONTEZUMA. I know that the S130 G-nose is one piece.... I would not be surprised if the S30 G-nose was also. I personnelly like the idea of it being a one peice unit.

See Group Buy section at Hybridz for getting this kit direct from japan.

MONTEZUMA: Can you answer that question?? Is it a solid nose, or a 5 piece kit?? I've never actually seen it in person, hope to soon!!

Yes your right.. thanks for pointing that out. I'm not sure if its a 5 piece of not. I will see if I can get more specific information. Don't hold your breath though, it took myself and my distributor over a month just to get them to discuss exportation. I'll see what I can do.

I have first hand time installing kits, and even the MSA kits take alot of work to get them correct. Unfortunetly, the kits that fit our older S30's aren't like the new ones you can get for the later model cars. Designers today plan ahead on such idea's unlike in times past. Thats why you will usually find specific lines are incorperated in the design work of the bodies which give the aftermarket tuner companies better guide lines, and instillation options that make the kits much easier to mount and design for each app.

Wanted to let all Z enthusiasts know, In the process of looking into the Aritaspeed G-Nose kit for the S130. I made sure to inquire about the G-nose kit for the S30, to include the complete Body kit. I will post the info here, and if anyone is interested in having the real deal Shipped direct from japan, let me know and we will start the ball rolling. ---------------------------------------------------------------- The price is higher than I wanted, but aritaspeed is not the most friendliest at export proceedures. Here are prices: G-Nose S130= $775 G-Nose S30 = $800 G-nose full body kit S30( G-nose, flares, tail) = $1,400 All parts are made of fiberglass. *( Still checking to see if the lenses come with it!) The prices above are is to get the item from japan, through customs, and to my distributors warehouse. Ground transportion costs to each customer would be added to the price individually. The unfortunate high cost is due to Arita's poor export prices, and high transportation costs for large items such as body kits. If anyone is interested go to the "Group Buy" section @ www.hybridz.org

Sal was the only guy there that I really wanted to speak with. Everyone else didn't seem to know what they were selling. I to have noticed a serious decline in the service quality with MSA. I contributed it to their huge growth in the last 5 years. Its definitely going to be a big loss... I wish him well, with much respect for all he has done for the Z community. B.

OER also has some TBI they sell. hanen't seen them in person yet, but they look really simple and clean.

Hey all, Just wanted to show you a few pictures from our booth this last weekend at the Redmond (Oregon) car show/ swap meet! Had alot of people stop by to check out the trick parts KAMEARI and O.E.R. offers. If your around the Oregon region, This next Saturday NorthwestZ is sponsering a Datsun car show and swap meet. We plan on attending this event, so if you would like to check out these parts first hand, stop by and say hello..... Should be alot of fun! Hope to see you all sometime soon, Best regardZ, Brian

For some items your right, their for a specific use, "Racing". Alot of these aren't to much more than some of the american made components. But allot are only offered by Kameari ( ex... Gear tensioner.) and I believe those items will sell fairly well. I wish you the best in becoming one of those deep pocket few! ( heck i'm not either ). But in the meantime, if you'd like something for your Z, don't hesitate to drop me a line. My first priority is to help out fellow Z enthusiasts, and I'm going to try my best to make some special offers, and group buy's. Best RegardZ, Brian

No offense taken. Actually the cost of the triples is not much different than you'd pay for lesser carbs.... 45mm Intake, manifold, linkage.. $2120 And these aren't Webers. These are true - race bred side draft carburaters that give more in design and function than a weber ever hoped to. You can get some things for less, but its just as most things, "you get what you pay for". KAMEARI has no competition when it comes to their performance engine products. They don't crank out parts in high volume, they "specialize". It shows in the materials used (chromoly, Titanium, Molybdenum), finishing technics ( Tuftride, Magnesium Oxide coatings, Chromium Oxide journals, Counterbalancing ), and proven performance on the tracks of japan.... It has nothing to do with how popular their name is, its how well their part have performed in japan that has given them their name. These parts are in a class of their own. These will add to the value of a vehicle, becuase they are so specialized. If I wanted to put the best performance parts on my car, These are the parts I'd use. ( and will !) But of course its all up to an individuals opinions, and preferrences. cheers,

Here are the triple's I offer from OER ( FNA: SK Carburaters ) from Japan. They have some amazing attributes not offered by other carburaters. These are true High performance, Race bred side draft carbi's. Info can be seen at: www.zccjdm.com

Z Car Customs -JDM has updated the website with part specs and descriptions! If you don't know about KAMEARI and O.E.R. products, stop by and read about these Japanese companies, and the amazing products they supply for early Datsun vehicles. www.zccjdm.com First shipments of items have arrived from japan. Not all items are in stock, and some may be limited. Any item can be ordered with a turn around time of around 3-4 weeks. Best RegardZ, zccjdm

Hello Z fans, I'm excited to say our webpage has had some updated progress. www.zccjdm.com This week we have been working hard on updating the KAMEARI and OER parts information and SPECS. So far we've completed alot of specs on the OER carburaters, KAMEARI gauges, and some of the Datsun engine series to include the A-series, and FJ20 Series. In the next week, we hope to have all the L4 and L6 Part information updated as well. KAMEARI'S parts information and specs are very impressive. If you get a chance, take a look. If you have anyquestions regarding some of the terminology of the process, don't hesitate to ask. Best RagardZ, B.

Now have 13 people interested. I placed the inquirey today, and expect a price quote by next week sometime. will post when info received. B.

This is information on a group buy that may be happening on hybridZ. OK... At this point, I have 8 people who have expressed interest in a group buy of a Aritaspeed Front airdam for the 280zx.....These airdam's are not offered in the US, and will have to be shipped from japan. I'm going to contact my distributor this week, and inquire about having these sourced and shipped here to the states. It's not a definite yet, but I'm going to do my best to make this happen. go to hybridz and join the forum if your interested.

I Currently have( 4) interested from hybridz.

I had seen a while back that there was some interest in trying to optain the ARITA Speed, S130 Front Airdam's. I have this same thread on HybridZ, and I'm posting here to see if anyone else may be interested. I wanted to gauge the interest in having a group buy to have these imported from Japan. If there is enough interest, I will make some arrangments to see what the cost's would be to make this happen through my JDM distributor. I've already discussed this briefly, and he said he would intertain the idea if there was enough interest. So far there are 3 people onboard.. I would like to see at least 6 before I take it to the information level. 8 would be even better. B.