jbsrace1
Free Member
-
Joined
-
Last visited
Everything posted by jbsrace1
-
This is a few years ago before making the switch to alcohol -
I will gladly E-mail any one a copy of any of my pictures. Just send me a address to jbsrace@jbsdragracing.com Thanks for the comments. John -
Margaurd is the Lexan that works. It is allot more scratch resistant than any other form of lexan.
-
Did you have brakes before you changed the lines? You may simply have air trapped in the master cyl? Instead of pumping the brakes try this. Go to the right rear and open the bleeder screw. Get someone to push the pedal to the floor and hold it. Then tighten the bleeder back up and have them release the pedal. Do this 3 times for each wheel starting with the right rear then left rear then right front then left front. This will help to push any trapped air away from the cyl. After this if you still have a low pedal then try to bleed them normally. JB...Make sure you check the fluid level from time to time wile you are bleeding the system so it don't run out of fluid.
-
-
-
-
-
If you have a long pull handle or ratchet you can position it so it is wedge against the frame of the car then put the car in first or second gear and push the car. The multiplication of the trans will help brake it loose
