zed2

Two variations of lenses (note the shape of tab at the bottom of each lens: Keith

View Advert 1970 - 1978 DATSUN 240Z 260Z 280Z Overhead MAP LIGHT / DOME LAMP 1970 - 1978 DATSUN 240Z 260Z 280Z Overhead MAP LIGHT / DOME LAMP Auction includes: Housing Lens Bezel Bulb Thank you for looking at this ad. Keith Advertiser zed2 Date 07/17/2022 Price $84.95 Category Parts for Sale

For the sake of documentation, below are two (2) Accelerator J rods. I cannot determined the original model/production year, since the parts were included in a box of parts I previously acquired. Keith

View Advert 1969-1971 240Z reproduction clear vinyl seat protectors Since these clear vinyl seat protectors are no longer available from Nissan, nor are reproductions available from existing fabricators, I sourced a large quantity of clear vinyl material to fabricate reproductions. These are for the 1969-1971 seats that do not have the recline mechanism. Set of eight (8) as shown in photo, (plus close-up photo) Material is same gauge/thickness as original Photos show: Set of four (4) original, aged and yellowed clear vinyl seat protectors and set of four (4) reproduction clear vinyl seat protectors. Set of eight (8) reproduction clear vinyl seat protectors - what you would receive upon ordering. The pricing is $48.00 shipped to a CONUS address. Shipping will be insured with tracking. If you are interested in a set, please PM me your full name, mailing address and Paypal address. I will then send you an invoice. Note, these are time consuming to produce. Therefore, I will only send the invoice when the set is available for shipment, production timefame as noted below Thanks, Keith Note: The last time I offered these was January 2022. So if you plan on needing a set before Fall 2022 please order now. Orders accepted in the first available production time frame ------------------------------------------------------------------------------ Maximum sets available with 1 week production time frame - 4 sets Reserved: 2 sets - Joseph A. (FB) - shipping Advertiser zed2 Date 07/14/2022 Price $48 Category Parts for Sale

Excellent...good memory about a prior post! Thanks, Keith

Does anyone have a comparison photo of these two type oil pans? Thanks, Keith

View Advert Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Jun 1975 Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Jun 1975 Originally included with the Datsun 280Z – Production Date Jun 1975 These chocks are 3.96 inches / 100 mm wide. Can be used with the 240Z and 260Z as well as other applications. Unfortunately, I do not have the other tools. Thank you for looking at this ad. Keith Advertiser zed2 Date 07/09/2022 Price $99 Category Parts for Sale

View Advert Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Apr 1975 Datsun / Nissan 240Z 260Z and 280Z Wheel Chocks - pair - date code Apr 1975 Originally included with the Datsun 280Z – Production Date Apr 1975 These chocks are 3.96 inches / 100 mm wide. Can be used with the 240Z and 260Z as well as other applications. Unfortunately, I do not have the other tools. Thank you for looking at this ad. Keith Advertiser zed2 Date 07/09/2022 Price $99 Category Parts for Sale

Can anyone identify the model year/production year of the two different length air cleaner fastener bolts? Left pair style is 81 mm, right pair style is 78mm Also, can anyone identify the model year/production year of the two different length air cleaner extension bolts? Left pair is smooth sided, right pair is notched Thank you, Keith

Here are three (3) variations of fuel/gas cap chains used to attached the cap to the retainer ring. Does anyone know the model year/series/production year of the various chains. Thanks, Keith

I recently visited the International Motor Racing Research Center (IMRRC) in Watkins Glen, NY (https://www.racingarchives.org/). Unfortunately, their collection of Datsun/Nissan information is quite limited. (I have attached photos of the titles currently in the archives.) Should you (or your family) decide to donate your Datsun/Nissan literature, please consider IMRRC a worthy caretaker of historical racing (or other) publications. Keith

I am still seeking guidance on Model Year or Production Timeframe the chain feature was added to the early style cap. Thanks, Keith

View Advert Door lock cylinder with "3011" code I am trying to assemble a lock set that uses the "3011" code. Please let me know if you have a spare "3011" cylinder available. Thanks, Keith Advertiser zed2 Date 05/04/2022 Price Category Parts Wanted Year 197 Model 240Z et al

They are original to the car. I do not want to restore them….only original once. Keith

January 1970 production car jack and chocks: Keith

Since Kimberly Clark (KC) discontinued the Evolution 4 fabric for car covers, the only KC fabric appears to be BLOCK-IT NOAH Barrier Fabric (not as sun/wind resistant). Has anyone purchased an outdoor car cover within the past 18 months which they are satisfied with the material? Thanks, Keith

zKars, What is the application process to prohibit the installed tape from unwinding from the covered wires? Keith

Which electrical tape do you prefer for wiring harness repair/maintenance? Please add the reason(s) for your preference. Also, please let me know if there is an alternative choice which should be added to the poll.

Sorry, no spare box lids. Keith

zKars, If you can provide additional information about the missing strip, I may have the part in my spares: https://www.flickr.com/photos/53116286@N07/51718901792/in/album-72157720208645992/ Keith

HS30-H, I understand your observation. I am a bit confused however, since the USDM Series 1 were shipped to the United States (US) without carpet and padding. The carpet and padding were cut and installed in the US, therefore why would US fabricator make accommodations for Japanese market forward seat mounts? (Unfortunately, I do not have access to "Japanese market forward seat mounts" to compare the measurements of the bracket locations and the cutouts.) The mystery is not yet solved! Thanks for your input! Keith

HS30-H, The photo in Post #120 is the USDM left side, noted by the heel pad on the floor mat. Thank you for your explanation of the circled cut-outs. Keith

Kats, Are you aware of any JDM floorboard stamping that would necessitate the jute cutouts indicated by the red circles in the photo below? Thanks, Keith

Jute in Serial No 4684: This is the earliest VIN jute photo I have found. Baring any other information, I will create my template based on the above. Keith

Great acquisition of parts. What is the part number(s) of the strut inserts? Thanks, Keith