240260280z

Pics here : https://www.google.ca/search?q=reaction+disk+site:www.classiczcars.com&espv=210&es_sm=122&source=lnms&tbm=isch&sa=X&ei=Gs0XU9q-OuzH0gGEtICgDg&ved=0CAkQ_AUoAQ&biw=1137&bih=570&dpr=0.9

You can cut a new one from thick rubber and glue it on the rod. Take a look at rubber door mats and door stoppers/bumpers if there is no supplier of rubber stock sheeting in your area.

Very RARE Pewter Collectable Datsun 240Z and 1960 1200 Truck in Cases | eBay

I'll be looking for you Greg! I hope to be in Boca for the 2nd half of March.

If you want to paint it (rather than stain) after repairing follow this process: AutoTraderClassics.com - Article Keep Your Original Steering Wheel!

Welcome to the club! A good friend is heading to Phoenix in a week. If you spy any early Z's that you pass on please let me know. He may pick one up.

Maybe grinding material from another wheel with an epoxy of some sort. Dr. 240z used a 2 part clear epoxy that is used on bar tables (looks like a layer of glass) to finish his wheel.

432-ish ....nice!

It's in the fsm so it can't be that bad. I also gobbed lots of grease on the top to hold back any oil and to prevent corrosion.

You would have had these same snags if you had refreshed all connections, I had the same issues with temp sensor, tach and turn signal switch. Murphy lives

1985 Nissan Skyline Paul Newman

4" of powder last night. I'm on vacation this week with the flu. It was fun shovelling my wife's car this AM. At least it was the kind of snow you can push easily.

I would have guessed Fiero because it's you but since it is an import I'll guess Subaru because some swap in Subie PS racks.

More: http://nissannews.com/en-US/nissan/usa/releases/nissan-unveils-revolutionary-engine-to-complement-electric-zeod-rc-powerplant

Maxima Differentials Sedan Manual All R180 3.70:1 Sedan Auto All R180 3.364:1

Anyone look at these for retro fit? Rack and Pinion

Did any of the domestic sedans in Japan have PS in 69-78? I think some of the s30's front suspension is from a previous sedan.

One More: http://i418.photobucket.com/albums/pp264/Aussie260z/190120095551640x480.jpg

Some photos in links below. No obvious hex heads protruding: http://www.classiczcars.com/forums/help-me/37639-inner-tie-rod-help.html http://www.classiczcars.com/forums/help-me/12727-tie-rod-help-needed-quick-before-school-starts.html S130 Slammage! - Page 24 - Project Datto - Ratsun Forums - Page 24

Mike, you are a true pioneer...many thanks for this great discovery!

Cleaning and adjusting throttle linkage helps. There are some geometrical changes that some have made to improve mechanical advantage,

On the timing, you are where I tuned a 240z with triples. Good to have convergence. btw Lazeum is spot on when it comes to webers and timing. Read his achived of posts.

Those are for a 77, I could be wrong in posting as the same as 240z