240260280z

Note: the nissan FSm states 23mm down from the roof of the fuel bowl, not the margin so the new height will be 19.6mm down from the margin for a '72 (We measured ~3.4mm from the roof to the margin on a 72 fuel bowl lid.

Note: the nissan FSm states 23mm down from the roof of the fuel bowl, not the margin so the new height will be 19.6mm down from the margin for a '72

Hardway and I measured the height of the fuel bowl roof from the gasket surface, I think it was 3.4mm so the 23mm down from the edge of the fuel bowl becomes 19.6mm down. We set the fuel level for this and the jets had to be set a little higher to optimize.

building a 5 liter 2 cylinder?

Are the jets sticking due to the chokes? The cable and grunge can cause problems. Separate the choke lever from the jet, disconnect the fuel line to the jet, then pull out from the bottom of the carb and clean the jet and orifice where it slides up and down. Here is a recent clean from an Austin Z

I was giving you space and working 60/80 hour weeks I may ask a favour of you though and may bring my better half down in a couple of weeks so there will be many opportunities to meet up.

For all you austin Z restorers Look what you have in your back yard; Restoration Quality Plastic Plating

Thanks for the kind words Jeff. I had a fun filled visit to Texas and it looks like I'll be back in a a couple of weeks. You and Mike are part of a great club. It was a pleasure to finally meet both of you and especially to hang out with your club at the Nissan Dealership show. I'm glad we had time to go through your carbs and look forward to the next time.... suspension right? I sure makes travelling much more enjoyable to meet Z enthusiasts, turn wrenches, and drive these cars.

Get the driver out of the car and race 4,000 hp "drones" with 6 liter 80 psi V32 motors, vacuum's sucking the car down....etc ...all the greatness of F1 technology w/o humans risking life..... then evolve to race virtual simulated car models beamed to 3d virtual reality rooms in everyone's houses..

Looks like no header in the top photos...just a hole out the back of the head into the turbine.

very nice...cool work... just saw you are russian so even cooler !

Perfect Fathers Day!

Dr. I just saw jan 71 s/n:19645 yesterday in Austin. Green with blk interior.

new: CARB TOP<br><font color="red">31734.198</font> old: Weber 40 Dcoe 32 Carburetor | eBay

Working in Houston until June 28. I hope to see Obi when work dies down. Any one in Houston want to meet up? Work on a Z? pick and pull? ride?

The fact is China manufacturing has learned how to polish a turd very well. I dare anyone to go there and buy cooking oil. (research this....no bull...but some polished turds for sure).

I'll be there...looking forward to meeting.

read my signature

I may crash it June '13 TX Tour to Loco Coyote

When you are dead in your coffin, what would you like people to say about you as they pay their last respects? "Look!! He's moving!"

Who needs Hybridz? This site does the trick for sure and no virus warnings is a bonus.

nice grey z31 in that track pic.

I can think of 8 reasons why any post from wavemux stands on it's feet btw wavemux... I mux waves for a living (dwdm optics)... whats the name's significance?

Montreal Starting: SkySports F1 : SkyF1 Live Stream Online