cremmenga

I've searched on here, on hybridz and all over about the dreaded pertronix ignition tach bounce fix. I find lots of places talking about it but nothing on fixing it besides getting a different tach. I have the 3.0 ohm coil that came with the kit and I bypassed the resistor just like the installation instructions suggested. My 1973 240z now starts a thousand times better and faster and the throttle response is great and seemed to pick up some power. The problem for me is between 3000-5000 rpm the tach will drop to zero then bounce like crazy. I don't experience and problems with misfiring or the actual rev of the motor, just the tac. Has anyone found a solution to this common problem yet?

Just not much on 17x7.5's

I've been searching through slot of threads on info about using the Rota rb 17x7.5 4mm wheels. All I've found is were someone randomly mentions them, not much info. I have a stock 73 240z, no flares. I was wondering if theses would fit with no rubbing issues? And if so what size tires would a guy want to use? I don't want to have the tires sticking out or have a stretched tire look. Any info would be great. Thanks guys!

I've been searching and reading through here for hours and hour and can't find what I'm looking for. I'm wondering if 16x8.25" wheels will fit on my stock 73 240z? The rims have zero offset with 4.63" backspace. If they will work what size tire should I use, I don't want the stretched tire look and don't want it to rub. All I'm finding in the search is 16x8 not 16x8.25, and maybe that's not enough to worry about, but I'm also concerned if the backspacing will be ok. Any help I could get would be much appreciated! These are the wheels I'm talking about..... http://www.nlmotoring.com/XXR-530-Wheels-16x8-25-Flat-Black-p/53068462.htm

I'm selling out guys! Got the motor on ebay and its going this week! I reduced the price of my Z t $1500. That is less than half what I have put in it! So if you are interested in buying it call me 308-325-6445. There are a ton of pictures of it in my gallery.

I'm selling out guys! Got the motor on ebay and its going this week! I reduced the price of my Z t $1500. That is less than half what I have put in it! So if you are interested in buying it call me 308-325-6445. There are a ton of pictures of it in my gallery.

I'm doing it guys, I'm selling. I know its a sad day, but I'm selling my Z and my LS1 motor I had for it!:disappoin EBAY # 180240923267 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&ru=http%3A%2F%2Fsearch.ebay.com%3A80%2Fsearch%2Fsearch.dll%3Ffrom%3DR40%26_trksid%3Dm37%26satitle%3D180240923267%26category0%3D%26fvi%3D1&item=180240923267

Guys I'm thinking about selling the Z and my LS1 motor and t56 six speed tranny so I can get a sport bike......... What should I do??????:stupid:

It official, I'm back, I took off about 6 months from the Z and this site, bought some cool guns and spent a SH*T load on scuba gear but now i'm back and focusing on the Z!! ITs good to be back fellas!!

i liked my webers!! i had dual webbers and my car smoked before i pulled the motor!!

ya like enigma said its not foam its asbestos. but it won't hurt you

I have a set of new floor rails sitting in my garage that I won't use if some one needs them!

my 240z had a/c when I got it. it was in kinda rough shape and i'm racing and it was just extra weight so I pulled it and trashed it. It looked like a half arse job who ever put it in too!!!

Don't do it man!! Its not worth it!!!