Jump to content
Welcome Guest! Please read more information about our club!

Jeff G 78

Member
 View Profile  See their activity

  • Posts

    3,007

  • Joined

  • Last visited

  • Days Won

    23

 Content Type 

Everything posted by Jeff G 78

  1. Jeff G 78
    I have a question about the full caps, since I have never seen one in person (here in Michigan there aren't many Z cars). Does the cap wrap into the gauge pod holes? If so, is there still room to remove the gauges from the dash with the cap installed? I always wondered how that worked since the gauges are not much smaller than the outer part of the opening at the face of the dash.
  2. Jeff G 78
    I would say that the strut towers are more likely to sag towards each other due to body flex, than away from each other. Therefor, adjusting them to have a tiny bit of pressure outwards should make them the most efficient. You might want to take a measurement of the towers according to the FSM and see if the distance between them is too big, or too small. All of the dimensions are on one page in the body section.
  3. Jeff G 78
    That's not curb, that's GVW. IIRC, the GVW of a Z is around 450 lbs for passengers and cargo + the curb (full of fuel, and other fluids). That would make the curb weight around 2300 for a STOCK Z. Wider wheels, larger tires, new paint over the years, and other mods will increase the weight from stock.
  4. Jeff G 78
    It might be worth a shot, but after cleaning and resealing my '78 tank last year, I can't imagine that you'll have enough room to work through the sending unit or filler neck holes. They are not very big and there is a large pipe running vertically in the center of the tank that might block your stick. Do you have pics of the dent?
  5. Jeff G 78
    I've never seen a '77-'78 anywhere near 3200 lbs. Most are between 2750 and 2850. The '70-'72 cars were closer to 2250. The later cars had more structure, more features, heavier engines, transmissions, rear axles, and of course, the big bumpers. All the little things add up quick like retractable seatbelts, air conditioning, wider wheels and tires, fuel injection, etc.
  6. Jeff G 78
    I really hate winter. I just spent 3 weeks in Phoenix and again realized just how much it sucks to put all my toys away for 6 months out of every year. I spend half my life waiting for nice weather... Until then, all I can do is get my fix here by looking at all of your beautiful cars.
  7. Jeff G 78
    I have a set of US Indy Mag 5 slots as well. I was told by a wheel dealer years ago (don't know if it's true) that US Indy Mag either turned into, or was bought by American Racing many years ago. The bolt-on centercaps are usually all interchangeable. MSA used to sell them, but I'm not sure if they do currently.
  8. Jeff G 78
    If anybody happens to be looking for a set of no name Libre wheels, I have a set in my basement. They were on a '76 I bought back in 1986. I took them off right away and they have been in storage ever since. I figured that I would clean them up and sell them someday, but if anybody is looking for a set now, I might sell them. They are straight and in good shape, but need a bit of scrubbing and polishing to be show ready.
  9. Jeff G 78
    I was 19 and bought 2 'field' Z's. After trying to work through the rust for a year, I gave up and went south for a clean car. I have owned a total of 9 S30's over the last 22 years.
  10. Jeff G 78
    Those are really cool looking rims KenshinX. I've never seen another Z with them.
  11. Jeff G 78
    Sorry to hear that. Good luck!
  12. Jeff G 78
    Wow, MouseZ! That's really bad. Have you talked to them yet about the quality?
  13. Jeff G 78
    Here is my '78 with three different wheels. First are the "Dukes of Hazzard" wheels, then some old Enkei wheels, and finally, my new Panasports.
  14. Jeff G 78
    I've owned many of each and I agree with TomoHawk. While the 240 is fantastically light, there is something to be said for several extra years of development time Nissan had to work with. The body is stiffer and safer, the electronics are better, the interior is nicer with retractable seatbelts, carpet, etc. It is easy enough to make a 280 track-worthy via the removal of non-essential creature comforts and the F.I. makes it a great daily driver. For me, it all boils down to buying the best S30 available at the time. If I narrow my search down to a few cars in the condition and price range I want, I pick the best S30, not specifically a 240 or a 280. I love them both for different reasons. I don't like the extra weight of the 280, but with a bumper swap, some of that is easy to ditch.
  15. Jeff G 78
    It appears to be an old Enkei wheel which was a copy of a Gotti wheel.
  16. Jeff G 78
    Not true. Web Cam still offers new sticks. They have been around for a long time and have 6 grinds for the L6. They will do internal or external oiling too. http://www.webcamshafts.com/
  17. Jeff G 78
    Yes, it could be called a radial rod. If you look just behind the front tire, you will see where the TC rod attaches to the frame rail. It goes between the frame rail and the lower control arm just inboard of the strut.
  18. Jeff G 78
    That would work. I am leaving Sunday for a three week business trip, but after I get back, I could take them to work and check them. Those are obviously progressive in front, while my 280Z 5022 springs are not. Mine have equally spaced coils F&R. They look the same on and off the car, unlike the pictures of 240Z's with 5020 springs I've seen. The pic I have on Photobucket is small, but here are mine.
  19. Jeff G 78
    Ron, keep in mind that Tokico does NOT make these springs. They simply put their name on H&R springs. Tokico makes many products, but springs are not among them. Of course, that doesn't mean they shouldn't better express exactly what it is they are selling. At some point this spring, I will make it a point to remove them and do a rate check.
  20. Jeff G 78
    Darrel, my guess is that the rates Blue quotes are for the 280Z Tokicos, not the 240 ones that you have. I also think that this is the source of the progressive / single rate debate. My 280Z Tokicos are not progressive and I *think* the rates are close to what MSA and Blue list. Sometime when I'm doing other suspension work, I'll remove mine and rate check them, but they feel much stiffer than the production springs. Remember that the 280 is around 500 lbs heavier than a 240, so the rates have to be higher.
  21. Jeff G 78
    How about No Man's Land? It was from 1987 and starred Charlie Sheen. He was a car thief that stole only Porsches. It had some good chase scenes. Another car movie was Duel with Dennis Weaver from 1971 and was directed by Steven Spielberg. It was a made for TV movie, but was done very well and had some good suspence.
  22. Jeff G 78
    Sorry to hear that you couldn't wiggle it back on. While you have the cover off, you can fine tune your wedge design. Try it out before you put the cover back on so you know exactly how to wedge it next time. Removing the cover really isn't that bad to do. It's annoying that you have to do extra work, but it's a pretty straight forward job. Don't forget to install new gaskets and a new front main seal while you're in there.
  23. Jeff G 78
    If it's that short, your chain wasn't wedged properly. The tensioner might not have popped all the way out though, so if you are lucky, you might be able to re-align the tensioner. Shine a flashlight down next to the wedge and see if you can tell if the tensioner is slightly out of place. A small mirror on a handle might help see what's going on down there. The tensioner has to be fully seated before the sprocket will slide on. You can reposition it with a long skinny screwdriver and a lot of patience. Good luck and don't feel bad. We've ALL been in your shoes at one time or another. The good news is that it probably won't happen to you again once you learn exactly how it all works.
  24. Jeff G 78
    I just have a problem with raising the ~40 lb battery up an inch in the car. I try to keep the CG as low as possible.
  25. Jeff G 78
    No, it will not fit an Optima. If you search the site using my login name and Optima, you will find a thread on this and see a bracket that I designed to work with a red top Optima. My Z is away for the winter, so I haven't actually fabricated the part yet, but I made one from cardboard and it should work very well. You might get a universal bracket similar to the one you have to work, but I think it will take something similar to my design before the Optima is properly secured. The bracket will require a bit of welding and fabrication skills, but you might find someone to make it for you. It's a very simple bracket.
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.