smokingwheels
Free Member
-
Joined
-
Last visited
Everything posted by smokingwheels
-
To be able to adjust that curve under WOT ,and log acceleration per/pistion it will be good and its MicroSoft product Who said a car couldnt run on it? -
To be able to adjust that curve under WOT ,and log acceleration per/pistion it will be good and its MicroSoft product Who said a car couldnt run on it? -
This program will really work but only if i can fit the rest of it in to 64k -
This program will really work but only if i can fit the rest of it in to 64k -
-
We i hope the guy on the second inspection does not look to hard -
We i hope the guy on the second inspection does not look to hard -
plugs are std heat, were fine until, ive nearly done it, the $65535 Refrigerator, hotter plugs, got bosch wdc10 see how they go. -
-
-
-
i think they are stock farly new -
using average Acceleration rate to correct timing Well i found its a bit slow to respond that way. Need Instantiations Hard and Variable acceleration when im pumping fuel n air in with the right foot -
using average Acceleration rate to correct timing Well i found its a bit slow to respond that way. Need Instantiations Hard and Variable acceleration when im pumping fuel n air in with the right foot -
1st n 2nd gears 5 runs various throttle openings well had to turn corners etc -
1st n 2nd gears 5 runs various throttle openings well had to turn corners etc -
-
-
yellow red and purple are real! -
yellow red and purple are real! -
The top point is ok but with WOT. The second point down is with no load. so its a bit out. -
The top point is ok but with WOT. The second point down is with no load. so its a bit out. -
-
-
.080" shaved off oh those poor chain guide holes. 1 tested soultion! A seasoned lump of Jarrah has got me out of trouble at least 4-5 times before. just cut a square out of an old lawnmower blade near the end, then put it Under the Head bolt this gives the wood something to hang on to. doesnt last forever but sure beats removing that bloddy cover.
