CanTechZ

Templates and a 3D model (.stp format) for a 240Z glove box. the main formed body and flat sides were checked against disassembled and flattened original parts and are quite accurate. The smaller formed corner parts are not as accurate.
Also included is a 1:1 scan of a tracing for the two formed corner parts, these parts were only roughly modelled and did not flatten exactly the same as the actual parts.

This is a 3D Assembly Model (.stp format) of a pair of LH and RH Interpart Lift Louvre Lock Assemblies. The assembly contains individual part models of the lock components. These plastic locks are no longer available so I hoping that these files will be of use to someone that needs to make replacements.   This model was created using Solid Edge ST5.  Also included is 3D pdf file of the same assembly for those that don't have a cad program and simply would like to view the model, it requires Adobe Reader X or higher to use.
I have done my best to accurately model these with measurements taken from a good condition set of parts.  These might be suitable for 3D printing, or could be used for CNC machining.  Users of these files should check them for suitability with the manufacturing process they plan to use.  The assembly includes the left and right aluminum mounting strips to show the complete assembly.
Other CAD 3D formats can be supplied on request.

Templates for the tar mats (floor insulators) for the front floor and under seat areas of a 1970 240Z in PDF and DWG formats. The dimensions were taken from my July '70 car. I measured these as accurately as I could and printed verification templates on a wide format printer to check fit. Transmission tunnel and rear deck templates have now been added, this now a complete set.

This a detail drawing of the key used to lock the Interpart louvres that were commonly added as an aftermarket accessory to S30's. Included is a DWG (AutoCAD) profile at 1:1 scale that would be suitable for laser or waterjet cutting.

This is a relatively high resolution pdf version of the 1970 Factory Service Manual - Body & Chassis Volume.   Does not include the Engine Volume.
Source:
DATSUN 240Z SPORTS SERVICE MANUAL MODEL S30 SERIES CHASSIS AND BODY
Issued Date: 15th August 1970 (020030)
Printed in Japan Publication No. SM0E-0S30G0
NISSAN MOTOR CO., LTD.

This is the Datsun 240z - 260Z section of the 1975 Mitchell Manual's Inc. Foreign Car Collision Estimator Guide for Auto Body Shops.
includes parts prices and labor hours from circa 1975.  The first few pages are a procedure explanation for using the Mitchell Manual.