1wildzer

Seen a grey w/ black fender 240z in the movie Zodiac right before her sees the Zodiac killer in the store. It passes by the door entrance.

Seen a black 240z in Grand Theft Auto a old 70' 80' movie.

I have a 73z and a 83 zxt. The 240z is waiting for Ztherapy carbs. The 280zxt is my DD.

In the movie "Friday" there's a brown 280zx when they're going into the liquire store.

I really need to know were the rear tail light harness is connected to. I see that there's two connecters that go under the car and the rest goes behind the right panel and goes under the metal towards the front of the car but were too. I need to know cause the PO cut the harness for the brack light for a tow hitch and I would like to replace it to original instead of it being spliced.Thanks!!!!

Here ya go http://hybridz.org/nuke/index.php?name=PNphpBB2&file=viewtopic&t=33728&highlight=z32+lights heres another http://groups.msn.com/Datsun280zClub/bigphils78280z.msnw?albumlist=2 one more http://hybridz.org/nuke/index.php?name=PNphpBB2&file=viewtopic&t=29679&highlight=z32+lights

n42 head & block $100 both have a 240z long block with E88 head $50 have E31 head $100 obo 4 screw S.U. carbs $100 obo 4spd trans $50 each r200 diff 3.54 gears $50 Have two front air dams $80 each 1 Straight hood $100 obo Good fenders $50 each bumpers for the 280z front is good rear has small ding in middle $50 both Set of Western wheels look like minilites $300 has 6 month old tire good headlight buckets $35 both hatch is good but has the holes drilled for the wing $50 ST lowering springs $70 ST rear sway bar $50 with bushings Friend stuff here's a the list of parts he has: Nissan comp header with exhaust 2.5 inch $300 sold Schneider valve spring new $80 SOLD complete msa bushing kit new $180 stock valve cover $20 chrome valve cover $40 turbo valve cover $30 tail lights in very good shape look new $100 turn signal lenses new $40 SOLD dash board with no cracks $400 SOLD lower valance $40 a/c compressor and smog pump $40 steering wheel stock $20 straight rear re-chromed bumper $200 obo f54 block and two 4spd trannies $50 each p90a head $150 obo E88 head $50 and other little things like shift knobs and interior pieces Everything on this page is best offer If you need pictures of the parts E-mail me.

It's a nismo header and a 2.5 inch straight pipe mandrel bent exhaust with group 1 muffler. This exhaust has a nice tone to it. It can be used on any square port head:E31,E88,n42,p90,p90a.

The bumper that my friend is selling is for a 71 240z. It has been re-chromed looks brand new.

Yea the club has more Z32 owners, but the club is about owning a Z and being with people that onw Z's.There's probably about 4 old school Z's that attend the meet inluding myself.Its just that there is more people that own Z32 in the I.E. or the people that own ols school Z's haven't heard of the club yea. The club is ran like Group Z. The y have helped us get started along with Indlan Valley car club. Thanks to them and all the work that the members have done we are and official Z car club. You can stop by and check us out anytime we are always welcoming new faces. Next cruise is on May 23 we will meet at the Denny's restaurant parking lot at 11:a.m. in Ontario off of Milliken. For more info just E-mail me at onewildzr@netzero.com

Maybe you guy would like to cruise with us on May 23 here in San Bernardino.For more info check out our site www.Empirez.com We need more old school Z's showing up at are meets.

For anyone interested in seen the parts you can E-mail me at onewildzr@netzero.com and I'll give you direction on how to get to the house.I dont have a camera so I can't post pictures of the parts.

n42 head & block $100 have a 240z long block with E88 head $50 have E31 head $100 4 screw S.U. carbs $100 4spd trans $50 each r200 diff 3.54 gears $50 xenon front air dam $80 2 Straight hoods $100 Good fenders $50 each bumpers for the 280z front is good rear has small ding in middle $50 both Western wheels look like minilites $300 has 6 month old tire good headlight buckets $40 both hatch is good but has the holes drilled for the wing $50 ST lowering springs $70 ST rear sway bar $50 with bushings Friend stuff here's a the list of parts he has: Nissan comp header with exhaust 2.5 inch $300 Schneider valve spring new $80 complete msa bushing kit new $180 stock valve cover $20 chrome valve cover $40 turbo valve cover $30 tail lights in very good shape look new $100 turn signal lenses new $40 dash board with no cracks $400 lower valance $40 a/c compressor and smog pump $40 steering wheel stock $20 straight rear re-chromed bumper $200 f54 block and two 4spd trannies $50 each p90a $150 head a E88 head $80 and other little things like shift knobs and interior pieces Everything on this page is best offer Thanks!!! Jorge

Have a 75 280z to parts out Have the following things to sell: n42 head & block,have a 240z long block with E88 head, have E31 head,4 screw S.U. carbs, 4spd trans, r200 diff 3.54 gears, xenon front air dam, 2 Straight hoods, Good fenders, bumpers for the 280z front is good rear has small ding in middle, Western wheels look like minilites, good headlight buckets, hatch is good but has the holes drilled for the wing, ST lowering springs, ST rear sway bar, Have 260 grill and a 240 grill ,Also have a couple of doors that have surface rust that are pretty straight, Have lots more stuff but cant think of right now The big stuff will have to be picked up Smaller stuff I can ship. Also have a friend that has lots of parts that need to go E-mail me for price Onewildzr@netzero.com

Have a 75 280z to parts out Have the following things to sell: n42 head & block,have a 240z long block with E88 head, have E31 head,4 screw S.U. carbs, 4spd trans, r200 diff 3.54 gears, xenon front air dam, 2 Straight hoods, Good fenders, bumpers for the 280z front is good rear has small ding in middle, Western wheels look like minilites, good headlight buckets, hatch is good but has the holes drilled for the wing, ST lowering springs, ST rear sway bar, Have 260 grill and a 240 grill ,Also have a couple of doors that have surface rust that are pretty straight, Have lots more stuff but cant think of right now The big stuff will have to be picked up Smaller stuff I can ship. Also have a friend that has lots of parts that need to go E-mail me for price Onewildzr@netzero.comThings that im keeping are the h4 light,ST front sway bar and the fuel injection system This is for pick up only Also have a friend that has lots of parts E-mail me Onewildzr@netzero.com

Have a new rear carpet $60 + shipping

Need to get rid of car. Doesn't have engine or tranny, no hood..All suspension and glass their. Theres rust in usual places. I’m located in San Bernardino. E-mail me at onewildzr@netzero.com

Have 260z for parts.No seats, no tail lights.

I have a 73 240z and a 74 260z. Need to sell them cant keep them at my house. The 240z starts and the 260z cranks over. Both cars have pretty straight bodies. All original all parts their. Asking $1,200 both.

Why do people say that round top SU's are better than Flat top.

I too will be going to the show on Sunday. In a 260z that I just purchased. I'll be with the Empire Z Club.

Thanks! guys for the help. The metal was not their just like billcapp said.

Well I just want to get the horn to work. Since I bought the car I never heard what the horn sounds like. Just want to know what to do to get It to work. Thanks!!!!

How do I get my horn to work. Thanks!!!

I want a pair of Fiber Glass Headlight Housings. I want to know were I can get them and for how much. Thanks!!!