Search the Community
Showing results for tags 'blast'.
Found 1 result
-
So I have a Harbor Freight blast cabinet. It is probably 15 years old or older. I have wanted to do the Tacoma Company upgrades to it for years but I've never pulled the trigger because the timing was always bad. I finally bought the pieces last month. https://www.tacomacompany.com/ The original cabinet Cut the bars out from under the frame New funnel adapter on bottom of the cabinet Drilled a hole in the left leg for a new air regulator Two new holes for the air and media for the gun Regulator Cut the lower shelf back New box that covers the air intake on the left side of the cabinet Air flow is reversed in this new setup I had to silicone the screws at the glove cuffs because the static from the cabinet would shock the fool out of you Cut the spring steel screen down and wrapped it with metal screening to prevent little parts falling down in the cabinet Added a foot pedal for the cabinet versus a hand trigger New gloves inside and a fresh piece of glass I have a switch on top that cuts the LED's on in the cabinet and start a vacuum that sits outside the shop door I finally got the air all hooked up today. It's a totally different cabinet now!! I can see and it cuts really quickly. I have some new Bufferfly screws for a quick change glass setup
