Search the Community

View Advert PAC Racing coilover springs (two), 2.5" ID FOR SALE: One pair of lightly used PAC Racing coilover springs. 2.5" inner diameter, 6" free length, 250 lb/in. Orange powder-coated. $75 shipped anywhere in the U.S. Thanks for looking. Advertiser jhm Date 07/18/2019 Price $75.00 Category Parts for Sale  

At the risk of sounding redundant, I wanted to put together a coilover list. There are a few of these threads/topics around the internet already, but lots of them are from years towards 2006 (I didn't even have my driver's license yet) and have old, outdated links, or are not very comprehensive and easy to read. I am looking at coilover sets for my '78 280z so these links will be specific to that (mainly so I can reference it later). Assume that all are ride-height adjustable. I didn't look super hard for lowest price, so the options may be cheaper somewhere else. Order: Expensive --> Least Expensive Format: Name | Cost | Colors/Special Notes | Link TechnoToyTuning Coilovers | $2040 | Maroon/gold, NO-WELD (send in your cores) | https://technotoytuning.com/nissan/280z/front-coilover-conversion-datsun-240z-260z-and-280z + https://technotoytuning.com/nissan/280z/rear-coilover-conversion-datsun-240z-260z-and-280z Arizona Z Car Coilover Set | $1600 | Red\Silver, camber plates | http://arizonazcar.com/coil.html Stance USA Coilover kit | $1295 | Black/Bronze, Camber Plates and Swift Springs @ +$300 each | http://sakuragarage.com/products/datsun-suspension/ BC Racing Coilovers - BR Series | $1200 | Black/Gold, camber plates | https://coiloverdepot.com/products/74-5-78-nissan-260z-s30-bc-coilover-br-type?variant=16741482757 KSport Control Pro Fully Adjustable Coilover Kit | $1080 | Black/Orange, Pillowtop Camber Adjustability | https://www.andysautosport.com/products/ksport__cns361-kp.html D2 Coilovers - RS Series | $1000 | Black/Purple, camber plates | http://www.sparktecmotorsports.com/d2-d-ni-01.html Megan Racing Coilovers | $900 | Black/Red, Pillowtop Camber Adjustablity | https://www.andysautosport.com/products/megan_racing__mr-cdk-280z.html CX Racing | $869 | Black/Red, Pillowball mount & Camber plate adjustable | https://www.cxracing.com/coilover/coilover-nissan-infinity/CO-B-280Z-0405-PB Ground Control Coilover Kit | $429 | Maroon\Yellow, No adjustability | https://www.andysautosport.com/products/ground_control__6020.01.html Other Evolved Front Coilovers (FRONT ONLY) | $1290 | Maroon/Gold, camber plates, NO-WELD (send in your cores) - Don't seem to list a matching rear set | https://technotoytuning.com/nissan/280z/evolved-front-coilover-conversion-datsun-240z-260z-and-280z Intrax | $??? | There are 4 options on their site. Can't find any pricing. Made in Holland. | http://en.intraxracing.nl/merken/datsun/ If I missed any, let me know and I can add them.

I have FINALLY finished just about everything for my coilover conversion in my 1978 280z with Stance coilovers. I also have TTT control arms. I am at the point of dialing-in the ride height. Stance gave me four 6" threaded sleeves. I had them welded right to the hubs in the front and 3" above the hubs in the back. I was hoping to maintain stock height or maybe 1" lower than stock. Well after getting everything on and lowering the car, it looks like the front was lowered around 1" and the back was lowered around 2". I would like to crank the rear up another inch. The problem is, the threaded sleeve is currently only on by about 5 threads in both front/rear. I am afraid to crank it up in the back because I feel like the coilover will sheer off if I go any higher with so few threads holding. So my questions are... How many threads are "safe" when screwing the sleeve into the coilover? I have not done anything with alignment, track width, etc. Will any of these affect my ride height? What are my options for raising the car if I can't unthread the sleeves anymore? Can I use a top-plate spacer or something?

Hey guys. Been a lurker for the past couple of months. Finally getting around to my first post. Come from the world of messing with 90's Volvo's so its been an interesting switch up for me as of late. Currently looking into replacing the suspension on my '76 280Z for a month or so now. Not looking to do any serious autocross or crazy stuff like that, just want to replace the stock suspension with something nice that will look good when done. Looking at the coilover options right now but a little divided on what route I want to go exactly. I've been reading up on the available options and due to there being many threads, some being very old (5 or so years). Im a little confused about the options, especially with what struts are currently available from what suppliers. I've read up a bit on strut sectioning and with the help of my roommate we should be able to accomplish the task. (Tools, welder, etc.) If I do go this option is there a good combo of strut and springs out there right now? I've also come across these: https://technotoytuning.com/nissan/280z/front-coilover-conversion-datsun-240z-260z-and-280z Have there been any negative comments on these outside they cost more than making your own coilover setup? Appreciate any help you guys can give even if its pointing me in the direction of a couple good threads. -Tom