Search the Community
Showing results for tags 'gauges'.
Found 4 results
-
So the speedo needle in my late model 260 started bouncing excessively the other day. The bounce range being 30 to 80 MPH. It works fine then bounces, back to fine etc, etc. So I took the speedo cable off at both the speedo and trans, it was well oiled and in what seems to be very good shape. I took it out of the sheath to check for cable damage and found none. I took the pinion gear out and it looks good also, 16 tooth no damage I can see. So...what's the deal, why the bounce. Is the speedo itself having an issue? Any thoughts?
-
1972 240z My gauges are not working properly anymore, either due to wiring or due to calibration issues. What gauges do you recommend/use? Tried some $70 set from napa but it wouldn't fit right. I saw on thezstore.com they had some gauges but they were like $400 for fuel, temp, and oil pressure. I would prefer black or white faces and that they light up. Thanks guys.
-
I recently installed the Crane xr3000 and used the 14 gauge wire - per the Crane instructions. However my tach is not steady and it will drop sometimes between shifts. It just generally works poorly. I have heard of a fix for this - anyone know what it is.
-
Dash gauges and wire harness intact, everything worked when removed. Tach included. Few cracks on the top of dash. $150 Blower motor, heater core, case. $50
