Search the Community
Showing results for tags 'senders'.
Found 2 results
-
Can anyone tell me what these things are on a 1974 late model 260z Unknown item 1 is on the passenger side mounted above the frame rail.(silver box mounting screws on top, might have been black in the past) Unknown item 2 (rectangle metal box with wires going to it) is under the black cover on the passenger side in front of the battery on the fender well. It is under the black cover on the back side (towards back of car). item 3 is on the opposite side of item 2 under the black cover towards the front of the car.(smaller metal box with wires connected) Item 4 (the silver box on the firewall) is on the firewall on the passenger side I am trying to find out what they are and then find replacements so I can add them to my back up parts in case they fail. Thanks
-
This is probably a DUMB question but.... I'm replacing all my gauges with Speedhut gauges to include their oil pressure and coolant temp units. I see from the FSM that both of the stock sending units go to the EFI control unit. Also, the new units require the use of their sending units. So... 1. Will the elimination of the stock sending units for oil and temp cause a problem with the fuel EFI control? 2. If I use Speedhut's sending units, which must be of different current and/r resistance than stock, be OK? 3. Do I need to keep the stock senders in place and ADD the new ones just for the gauges? If yes, does anyone have any recommendations on the best way to do so? Sorry for the multiple questions. I found many related threads but none touched on this issue. Thanks!!
