Search the Community

I need the door locking mechanism for the drivers side door of my 1972 240Z. I'm not exactly sure what the piece is called but its stopped working after years of use and no the door won't close. If anyone has one for sale or knows where to get one. I tried craiglist or ebay but no luck.

I happened to be looking at my '70 Z's door striker plates (aka 'door catch') the other day and noticed, for the first time, that they're not as simple in design as I thought. It had always been my impression that they're just one-piece metal stampings. When I turned one of them over, I discovered that this isn't the case at all. They're actually pretty complicated in design and construction, consisting of: Main stamping Cushion Block (rubber molding with a metal insert) Mounting Pin & Spring for Cushion Block Mounting Boss (metal stamping) for Cushion block I'm not really sure how the cushioning block arrangement is supposed to work. Any efforts to make it pivot on its mounting pin have been unsuccessful, so I'm not even sure if it's supposed to move in the first place (but then, why is there a spring? and why does it appear that there's a metal tab on the mounting boss to set a 'rest' position?). Note: In the third picture, I levered the 'leg' of the cushion block away from the striker plate surface to show the amount of flexibility it has (i.e. the leg's displaced position wasn't generated by the cushion block pivoting on its pin). Normally, the 'leg' rests on the inner surface of the striker plate, as shown in picture #2. In addition, I'm not sure whether either of my striker plates has a fully-intact cushion block. As you'll see from the last picture, the cushion block for my left-door striker plate has broken off up near the pivot pin. I'm not even certain that the cushion block on my right-side unit is still its original length. Notice how the rubber has worn off on the 'intact' cushion block to expose the metal underneath. This would be the place where the latching lobe impacts and sits when the door is latched closed. So, two questions: 1. Does anybody have a picture of a NOS striker plate that shows what the cushion block looks like when it's new? 2. Can anyone explain how the cushion block is supposed to work? (i.e. Is it supposed to pivot and, if so, how much? If not, why is there a spring?)