Search the Community

Hey guys, you might have seen my posts in the various facebook groups over the last couple of days, but finally I´ll post here too, after I gathered most infos about the commonly asked questions. I’ve a glass manufacturer on hand who will produce new glass for our S30 Z’s (2 seater) It will be thinner and therefore also lighter but still obtain all safety regulations including the E sign and also the DOT number. So fully street legal in Europe and the US including all necessary testing that goes with it. Some might think thinner means a weaker windshield and also a higher risk of damage due to stone chips or what not. I ask for a statement from the manufacturer which at least to me makes sense.... so due to the fact that it’s thinner it’s also more flexible and absorbs the impact better. As our cars are not relying on structure integrity of the windscreen, it also doesn’t change any rigidity of the car. Thicker and therefor harder glass is also more brittle. The windshield for example will be approximately 5kg lighter due to the reduction from 6,76mm to 3,96mm. We’re still looking into how to seal everything but it probably has to be glued into the window seal. Then we would still be able to use the standard gasket. But that’s also the case iaw the Nissan FSM, at least for the 280z. I’m looking for people who are also interested in new door glass and rear hatch glass as they have to build a new form for it. We need in total 10 pieces made to justify the cost for a form. The sides will be 3,15mm instead of stock 3,85mm. Same for the rear hatch window. Horizontal Heating will be possible in the aft one but can also ordered without heating. Vertical heating is still questionable due to low demand, probably. (another tool has to be made for "printing" it on the glass.) Prices are without TAX but including shipping in germany, for exact shipping quote send me your address via pm and I forward it to the manufacturer. Windshield: 390€ with 2x 1,6mm glass 240€ with 2x 2,1mm glass Still waiting on raw material for these ones... sadly...: Door and hatch glass: With 10 orders: 500-600€ a piece. With 20 orders 350€-450€ due to the tooling costs. These prices are very rough calculated as the manufacturer is still waiting for answers from their supplier regarding the blue tinted glass (like OEM) in the right thicknesses. So I hope they will go down by a lot. Should know more in that regard beginning of next week. Maybe it has to be clear, let’s see... Iaw the parts catalog at least windscreen and rear hatch glass are the same across 240/260/280z. Door windows have differences in the MJ, for now they would use a 78" 280z for the forms, I hope they´re able to use them for 240/260Z too, as the general form should be the same for the door glass, just the holes and the part which mates to the metallic window mechanism has another cutout... but lets see. Shipping and selling will be done through the manufacturer and is possible worldwide. Please comment for general interest. I´m only trying to get it going with the manufacturer. Let’s see if they actually start to produce it. Bigger group buys will get an additional 10-20% off. Alright, thats it 😄 comments welcome, please discuss the idea 🙂

Could anyone tell me roughly what i should be paying for a replacement windshield? I am in the UK Cheers