Jump to content

Recommended Posts


I now have a new set of H-4 conversion euro lense lights on the Z (70')

They work awsome and install was a snap. Four philips head screws to remove the rear headlight assembly. Three screws remove the retaining ring on the bulb. Pull the bulb and unplug it.

I used the MiiG H-4 headlight Euro conversion kit w/ Zargon gas bulbs (zargon is one step up from zenon.) The kit also has a (Streetlights) bulb plug in it, but thats another story. DO NOT GET THE (DIAMOND CUT) housings!!!

THEY SUCK!

Its up to you (depending on how original you want to keep your Z) but most people like to cut a hole in the back of the head light assembly in order to access the new H-4 bulb for replacement and then they put a big rubber plug in the back to keep it clean and dry.

Your stock plug will attach perfectly to the new H-4 bulb. reassemble the headlight assembly and your done. It's really that simple.

Link to comment
https://www.classiczcars.com/topic/13365-headlamps/#findComment-96091
Share on other sites

Yes, just like any othe head light

top vertical screw for up + down

side screw for left and right

it has the same form as a regular headlight, it just allows you to use a H-4 bulb instead of a halogen

Would you like any wiring diagrams for wiring relays straight from the battery to the headlights via relays, while only using 1 to 2 amps through the fuse box rather than the 15 to 20 that you are currently using. Which will also MELT your fuse holders over a small period of time. The new wires and relays will cost you significantly less than a replacement fusebox and harness, that is, if the car does'nt catch fire first.

the supply list is simple:

-wires-

2-30/40 2-way automotive relays (aprox $5.00 each)

4 ft of 8 gauge power wire w/ a 30 amp fuse holder (less than $10.00)

12 ft of 12 gauge power wire

3 ft of 16 gauge speaker wire

-connecters-

6-yellow 12-10 gauge nylon female fully insulated quick disconnects 6-blue 16-14 gauge nylon female fully insulated quick disconnects

6-blue 12-10 gauge nylon MALE half insulated quick disconnects

3-yellow 12-10 gauge nylon half insulated Ring terminals

Heat shrink is optional but will help protect your wires and connections from the elements.

If you e-mail me, I will give you diagrams of how to wire it all up w/ relays and all other supplys, it's the way that Nissan should have done it 34 years ago. It's fairly simple to do and will take an hour or so and will last for years to come. The less current draw you put on your system and fuse box, the longer it will last, the brighter the other lights on the car will become.

It's one of those (win/win) things. It is SOOOOO worth the few hours you'll put in to it, and all the money you'll save in the future.

wolfin32z@yahoo.com

Dave.

Link to comment
https://www.classiczcars.com/topic/13365-headlamps/#findComment-96115
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1,414 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.