Zak's Z Posted October 4, 2005 Share #1 Posted October 4, 2005 Hi Guys,While my '72 is in the shop getting new floors/rails, I found a donor car, and the seats in it are in nice shape. After I cleaned them up, I noticed some slight overspray (red) on the sides (door sides of course). I went so far as to take some varsol and superfine steel wool and gave it some light scrubbing, but I ended it there before I did any damage, and thought I'd ask the pro's. Does anyone have an idea on how to get it off? I think black vinyl paint might be a last resort, but I'd rather try and get it off first. Thanks,Zak Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/ Share on other sites More sharing options...
montoya_fan01 Posted October 4, 2005 Share #2 Posted October 4, 2005 Soak one end/corner of a clean soft cotton towel with Isopropyl alcohol. Rub a Dub, When overspray is gone, wipe with water dampened cloth.. Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140464 Share on other sites More sharing options...
sideshowbob Posted October 4, 2005 Share #3 Posted October 4, 2005 Your only option may be acetone. If all else fails rub a cloth soaked in in on the spray and quickly remove it with a clean rag. Use sparingly, it can tear up the vinyl. Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140469 Share on other sites More sharing options...
beandip Posted October 4, 2005 Share #4 Posted October 4, 2005 I use Laquer thinner , it is less aggressive than aceatone I believe . However either will damage the finish if you are not careful . Dampen a clean white cloth with the thinner and gently wype accross the paint . DO NOT scrub and DONT SOAK THE RAG IN THE THINNER . Be patient and wait a min or so before you wype again. When you have removed the offending paint , if the finish on the vinyl is dulled . By some SEM Color Coat vinyl spray paint in Landau black . this will give the shine like the orgional finish . This spray is about $10.00 a can but it really good stuff . I have used it on my interior and am vary happy with the results . I found it in the automotive paint supply store where I bought the paint for the Z . Gary Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140476 Share on other sites More sharing options...
sideshowbob Posted October 4, 2005 Share #5 Posted October 4, 2005 They're the same thing. Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140480 Share on other sites More sharing options...
Zak's Z Posted October 4, 2005 Author Share #6 Posted October 4, 2005 Thanks guys..Ill give it a go tomorrow. The Z is actually becoming a reality now, and I can just start to see the light at then end of the tunnel..when its back from getting the floors/rails, i will start the body prep. Hopefully same time next year she'll be all original and solid. Ill have lots of questions in the mean time!Cheers,Zak Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140486 Share on other sites More sharing options...
montoya_fan01 Posted October 4, 2005 Share #7 Posted October 4, 2005 sure they are. :stupid: Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140487 Share on other sites More sharing options...
beandip Posted October 5, 2005 Share #8 Posted October 5, 2005 They're the same thing.LAQUER THINNER AND ACEATONE ARE THE SAME ?? You need to change the filters in your spray mask . Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140491 Share on other sites More sharing options...
EScanlon Posted October 5, 2005 Share #9 Posted October 5, 2005 As Gary mentioned, use the Lacquer Thinner, but do be careful. If your rag is soaked, you can cause as much damage as you can with Acetone. Acetone is way too agressive for the vinyl and will mark the vinyl in nothing flat. Isopropyl Alcohol is good for degreasing and opening up the grain when you're ready to paint (and back-rubs), but I prefer SEM's Vinyl Cleaner. It works quickly and leaves the surface ready for paint.2¢Enrique Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140525 Share on other sites More sharing options...
sideshowbob Posted October 5, 2005 Share #10 Posted October 5, 2005 Errr. my fault there. It's fiberglass resin solvent that = acetone, I use it to remove lacquer overspray and, well, dissolve resin. The fumes are overpowering :sleep: Link to comment https://www.classiczcars.com/topic/17492-overspray-on-seats/#findComment-140577 Share on other sites More sharing options...
Yarb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now