sblake01 Posted February 12, 2011 Share #13 Posted February 12, 2011 Zed Head.....doesn't that post seem a little strange?? Joined yesterday, made that post, generic comment, left immediately, hasn't been back since...... Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-345549 Share on other sites More sharing options...
Zed Head Posted February 12, 2011 Share #14 Posted February 12, 2011 Yes it does, but it didn't have any SPAM associated so what the heck. Benefit of the doubt.I'm not really up on how those troll-bit things work. Didn't check that he left immediately and hasn't been back (how do you tell?). What do you think? Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-345551 Share on other sites More sharing options...
Arne Posted February 12, 2011 Share #15 Posted February 12, 2011 His IP address does match his profile location... Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-345558 Share on other sites More sharing options...
sblake01 Posted February 12, 2011 Share #16 Posted February 12, 2011 His join date was 2/10/11, his post was at 2:47pm and his last activity was at 2:47pm. That and the content of his post.....I could be wrong. Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-345559 Share on other sites More sharing options...
NCLarry Posted June 19, 2020 Share #17 Posted June 19, 2020 Anyone know the size/thread for the nut for the idler pulley bolt? Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-601498 Share on other sites More sharing options...
EuroDat Posted June 20, 2020 Share #18 Posted June 20, 2020 The nut is a M10x1.25. The pitch is fine compared to the normal nuts (M10x1.5) you will fined in a hardware store. You best bet would be an autoparts shop or machine shop. You could ask a garage is you can hunt through a nut and bolts tin. Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-601531 Share on other sites More sharing options...
EuroDat Posted June 20, 2020 Share #19 Posted June 20, 2020 (edited) The other thing you might want to know is the nut flats are 14mm opposed to the standard M10x1.5 nuts with 17mm flats. 17mm should still clear the bearing. The flat washer also has a small outside diameter OD: 16mm, ID: 10.2mm, thickness 2mm. The spring washer is normal size. Edited June 20, 2020 by EuroDat added photos 1 Link to comment https://www.classiczcars.com/topic/18623-ac-idler-pulley-rebuild/?page=2#findComment-601532 Share on other sites More sharing options...
Wilbur
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now