madkaw Posted January 5, 2007 Share #1 Posted January 5, 2007 I am putting my front end back together after powder coating and my memory has failed me again. The control arms have urethane bushings and they are made to offset the contol arm in the front crossmember. I can't remember if the offset is to the front or the rear of the crossmember.Any help would be appreciated!!! Link to comment https://www.classiczcars.com/topic/22853-front-control-arm-bushings/ Share on other sites More sharing options...
ktm Posted January 5, 2007 Share #2 Posted January 5, 2007 Small bushing to the front, which would offset the control arm to the front.Remember, do not torque the control arm bolt to spec with the front control arms unloaded. You need to torque the bolt to spec when the car is one the ground (and ideally loaded with 2 people).Finally, remember that the bolt head faces the front, the nut on the back of the crossmember. Link to comment https://www.classiczcars.com/topic/22853-front-control-arm-bushings/#findComment-194687 Share on other sites More sharing options...
madkaw Posted January 5, 2007 Author Share #3 Posted January 5, 2007 thanks KTM, that's what I needed. Link to comment https://www.classiczcars.com/topic/22853-front-control-arm-bushings/#findComment-194719 Share on other sites More sharing options...
Doehring Posted January 16, 2007 Share #4 Posted January 16, 2007 Has anyone experiance with the camber bushing kit - front? Does the excenter turn under pressure of hard cornering?Thanks for infos!Rolf Link to comment https://www.classiczcars.com/topic/22853-front-control-arm-bushings/#findComment-195682 Share on other sites More sharing options...
Wilbur
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now