Homemade Rotisserie

[76Datsun280z]

That's awesome, I bet you're itching to use it!

[Nissanman]

The '73 Z in the background is already on the prototype, the second rotor was sold.

I have all the plans and dimensions for anyone who wants them.

[datsunrides]

Here is a link to a site that I posted pics and a short writeup of my homebuilt rotesserie on. Worked well for my Roadster and you can store some engines when your done!

http://www.311s.org/phpBB2/viewtopic.php?t=4862&highlight=rotisserie

[mckkm]

<SNIP>

I have all the plans and dimensions for anyone who wants them.

QUOTE]

Nissanman,

I would be very interested in the plans and dimensions. You can post them here for all, or PM me. Thank you.

Monte

[jmortensen]

Here is a link to a site that I posted pics and a short writeup of my homebuilt rotesserie on. Worked well for my Roadster and you can store some engines when your done!

http://www.311s.org/phpBB2/viewtopic.php?t=4862&highlight=rotisserie

That's very similar to what I did, except I made the masts taller by buying a 3rd engine stand and cutting it up and adding I think a foot more height to the rotisserie. This allows the Z to spin all the way around, although there isn't much clearance on the rear fenders. If I had to do it again, I'd add just a bit more so that I could bolt on my flares and spin it without knocking them off.

[John Coffey]

I know this is an old thread but... John, is it possible to post parts, etc. needed to be able to make your own rotisserie.

I don't really have a material or cutting list. I just kind of make 'em as the need arises.

[Nissanman]

I have added a couple of CAD images and expanded the captions to the pics. on my Imagestation site for the body rotisserie.

I figured that was the easiest way to inform those who are interested in the plans.

Let me know if there is anything else you need to know.

http://www.imagestation.com/album/pictures.html?id=4287967191