FairladyZS30 Posted May 14, 2007 Share #13 Posted May 14, 2007 um...lucky you....this routine didt work for me Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-209502 Share on other sites More sharing options...
New-to-240z Posted May 23, 2007 Share #14 Posted May 23, 2007 sorry to bring it back from the dead, but i have been having this same problem.SO, i checked for the relay under the dash on driver side. Found it. I can hear it clicking on and off, but VERY VERY FAINT, and that's only when i do driver side turn signal. The pass turn signal doesn't even flash. If i pul hazard pully, all lights flash , (ie. front 2 orange, and rear brake lights.)I was wondering if there is a seperate relay for the passenger side, and if maybe the relay isn't strong enough to push the power to the lights all the time. I will be cleaning out the connectors VERY SOON, but first wanted to check on here and see if it could be as easy as just the turn signal relay being bad. Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-210462 Share on other sites More sharing options...
EScanlon Posted May 24, 2007 Share #15 Posted May 24, 2007 The Z's have TWO relays. One for the Hazards, one for the turn signals.2¢E Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-210493 Share on other sites More sharing options...
New-to-240z Posted May 24, 2007 Share #16 Posted May 24, 2007 Just to let everyone know, went to MSA today to pick up a relay and they charge $20 for it!!!!! I got the nissan part number and will be heading down to autozone soon to see if they can match it for a generic version. Hopefully much cheaper. Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-210494 Share on other sites More sharing options...
tx260z Posted June 1, 2007 Share #17 Posted June 1, 2007 Had the same problem, no signals at all but had hazzards. Plugged in an extra hazzard switch from my parts car then they worked fine. Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-211051 Share on other sites More sharing options...
Zs-ondabrain Posted June 1, 2007 Share #18 Posted June 1, 2007 Another thing to keep in mind is the hazard switch. When the switch starts to go bad, the turn signals also suffer from it. If I bump my hazard switch just right, the turn signals will not work, until I play with the hazard switch, then they come back on.The turn signals all go through the hazard switch.Just throwing that one out to you guys. Just an FYI.Dave. Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-211073 Share on other sites More sharing options...
Foo2rama Posted June 19, 2007 Share #19 Posted June 19, 2007 Thanks for the heads up! I have this same problem and I will be going through these steps! Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-212712 Share on other sites More sharing options...
wfl_colorado Posted June 22, 2007 Share #20 Posted June 22, 2007 I haven't looked into it very hard and it seems obvious that the turn indicator is the issue. The right turn signal works fine, but the left turn signal is intemittent. I am assuming it is some sort of contact issue. Is a replacement required of simply a cleaning?Tx,Bill Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-212920 Share on other sites More sharing options...
bigoak Posted June 23, 2007 Share #21 Posted June 23, 2007 Have a look at this link...I used it to clean up the contacts and magic...I could turn again...http://www.classiczcars.com/forums/showthread.php?t=23325 Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-213036 Share on other sites More sharing options...
manuel gutierre Posted June 28, 2007 Share #22 Posted June 28, 2007 Hi, I to had the same probem after changing the dash, the relay was not connected. Now they work but flash very slow. can anybody help? thanks, manuel Link to comment https://www.classiczcars.com/topic/24251-turn-signal-dont-work/?page=2#findComment-213567 Share on other sites More sharing options...
slogan5
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now