Maxi-Fuse holder

[matria]

I am looking for a 2 position Maxi-Fuse holder to wire my up the fuseable links on my early 260z. I have located a holder made by BEP, Mfr # 704HDBFH , link below, but was wondering if anyone had any other ideas or suggestions.

http://www.eangler.com/product/196978589msk.htm

Thanks for your help,

Skip Dawson

[Obewon]

Take a look at this site. Not bad for $60:

http://www.hammondsplains.com/s30upgrades/maxifuse/index.htm

This is the main site:

http://www.hammondsplains.com/z/

[GILDIA]

I use this one on a 240z

http://cgi.ebay.com/Bluewave-Audio-Platinum-MAXI-2-Fuse-Distribution-Block_W0QQitemZ180237550317QQihZ008QQcategoryZ50550QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

------------------------------

240z 72

Mexico city

[ktm]

Walmart has them.

[matria]

Thanks for the replys. The reason I was looking at the BEP unit is because it is 2 wires in and 2 wires out. No need to cut and change any of the wires going into the link. With the wiring in the 260Z already being weird, I did not want to have to change anything.

Thanks again for the help,

Skip