Looking to buy Fuseable Links for a 76-280z

[mgood]

I did a quick search and did fine some info. on the fuseable links for the 280, I was wondering if the parts could be purchased at a Nissan dealer and if any one knew the part numbers. I noticed this weekend that the plastic coating on the black one in my car is cracked not burnt just cracked.

thanks,

[sblake01]

24161-A0100 is the part number for the 80 amp-1.25mm2. Not sure if Nissan still carries them. If you can't find any, I have a few good spares.

[webdawg1]

The following url should help you out some...

http://www.zzxdatsun.com/280z_stuff.html

webdawg1

[sblake01]

Hey, webdawg, I recall fixing your links in the past. You must have something in your user cp that prevents urls for parsing properly in your posts.

http://www.zzxdatsun.com/280z_stuff.html

[mgood]

Thanks to all, that is what I am looking for.

[webdawg1]

Sblake01,

I've looked around in my settings...did not see anything that would turn on/off the url funtion. (I.E. - Have always done a copy paste from IE to posts in the past and it has never came up as a clickable link) Over at http://www.zcar.com when I do a copy/paste for a url it does show up as a clickable link...go figure...

webdawg1

[sblake01]

In the user CP, in Edit Options, down in the Miscellaneous Options area in the Message Editor Interface, are you using Standard editor-extra formatting controls?

[webdawg1]

Ok...lets see if it works now...I changed it to standard editor-extra formatting controls? Never even knew that was even in there......Hello...

http://www.atlanticz.ca/

webdawg1