studioti Posted February 16, 2010 Share #1 Posted February 16, 2010 I'm thinking of installing a Pallnet custom fuel rail. I was wondering if I could remove the entire Cold Start Valve all together. I live in Southern California and i rarely ever start my car in weather lower than 60 degreees.Would just like some input here. thanks Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/ Share on other sites More sharing options...
Z train Posted February 16, 2010 Share #2 Posted February 16, 2010 Why are you changing fuel rails? Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-309804 Share on other sites More sharing options...
studioti Posted February 16, 2010 Author Share #3 Posted February 16, 2010 just want to clean up the "spaghetti" on top of the intake manifold. i'm not really looking to booster performance or anything. just want a cleaner looking engine bay. Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-309823 Share on other sites More sharing options...
Zed Head Posted February 16, 2010 Share #4 Posted February 16, 2010 I live in Portland Oregon, fairly cold up here, and have been driving my car all winter with the cold start valve fuel supply disconnected. It just takes a 1/2 second longer to start but once it's going it's fine. I will not be reconnecting it. I think that it may have been leaking a little.The left over fuel supply line makes a good spot to install a fuel pressure gauge. Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-309830 Share on other sites More sharing options...
studioti Posted February 16, 2010 Author Share #5 Posted February 16, 2010 Thanks Zed Head. I'm not a mechanic, but after studying the diagrams of how the Thermotime, Auxillary Air Regulator, and Cold Start Valve work together. I've deduced that the entire setup equates to more fuel and more air at the start up.With everything currently hooked up right now...i STILL need to give the gas pedal a little help to raise RPM for the first 15 seconds. This being said, i can either replace every part of of the system, or be gone with it and just warm up my car manually with my foot. Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-309835 Share on other sites More sharing options...
Z train Posted February 16, 2010 Share #6 Posted February 16, 2010 Or tap another hole off the new fuel rail. Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-309839 Share on other sites More sharing options...
studioti Posted February 17, 2010 Author Share #7 Posted February 17, 2010 The Pallnet fuel rails can be ordred custom to have extra taps on it for extra lines going to a cold start system. I might...."might" go this route, but it would mean a new valve (because mine is leaking) and a new air regulator...but at startup mine does not raid the idle speed with more air, so it must be broken. who knows... could be the thermotime as well. Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-309845 Share on other sites More sharing options...
FastWoman Posted February 25, 2010 Share #8 Posted February 25, 2010 I used to have a '75 in another warm climate -- central Texas. It was very hard to start when my cold start valve wasn't operating. Link to comment https://www.classiczcars.com/topic/34773-remove-cold-start-valve/#findComment-310700 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now