blackblaze427 Posted July 6, 2010 Author Share #37 Posted July 6, 2010 gotta love holidays and all that jazz, kind of fallen behind havent had any materials. but hopefully ill be getting some sometime this week and we can get this bad boy back on track Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-324569 Share on other sites More sharing options...
kenz240z Posted July 6, 2010 Share #38 Posted July 6, 2010 I'm currently working on a LT1/T56 swap into a 240Z. I bought a complete '95 Firebird donor car so that I would have the engine, tranny, driveshaft, PCM and wiring that I needed for the swap. And I also have the factory GM service manuals, which are a must for this kind of swap. I have the LT1 and T56 in the car, need to get the brakes going and then I can take it for a shakedown drive.I have more details on HybridZ.org, as this site is dedicated more towards stock Z cars. Shoot me a PM if you have any questions, as I have the LT1 up and running in my 240Z.Cheers Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-324574 Share on other sites More sharing options...
R_3 Posted July 8, 2010 Share #39 Posted July 8, 2010 Thanks! it might be a little while. We are focusing on the body first then the drivetrain. Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-324742 Share on other sites More sharing options...
240znz Posted July 8, 2010 Share #40 Posted July 8, 2010 Good decision on the new shell guys. If you don't decide to use a cage, at the very minimum ensure that you put in front and rear strut braces. Even consider extending the floor top hats back so that they connect to the rear frame crossmember (that the suspension hangs off). That will stiffen the tub up heaps.Keep them pics a comin. Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-324753 Share on other sites More sharing options...
R_3 Posted July 23, 2010 Share #41 Posted July 23, 2010 Supplies to repair the body ordered and delivered. Hoping to see some updates soon. As far as reinforcements go, I will need to see what kind of space we have in the engine bay for the strut tower bar after the v8 is in place. The rear will most likely get one as well, but the car is getting the bad dog parts full length frame rail kit as well as the roll bar/cage kit installed as well. It should be quite stiff when all is said and done. Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-326298 Share on other sites More sharing options...
R_3 Posted September 19, 2010 Share #42 Posted September 19, 2010 so the project begins....again! Just picked this thing up and plan on swapping all of the fun stuff out of it and into the new shell Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-331176 Share on other sites More sharing options...
R_3 Posted August 15, 2011 Share #43 Posted August 15, 2011 Some updates: started on the engine bay. Did a test spray on the roof to see how many coats it needs. Currently: Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-364111 Share on other sites More sharing options...
R_3 Posted August 15, 2011 Share #44 Posted August 15, 2011 (edited) wet sanding is happening.. Bringing it home by the end of the month. Edited August 15, 2011 by R_3 Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-364112 Share on other sites More sharing options...
motorman7 Posted August 15, 2011 Share #45 Posted August 15, 2011 I love the color and the motor. Need to get one of those motors for my yellow Z. Thanks for posting the pics. Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-364114 Share on other sites More sharing options...
R_3 Posted September 6, 2011 Share #46 Posted September 6, 2011 Its now home! Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-365619 Share on other sites More sharing options...
R_3 Posted September 13, 2011 Share #47 Posted September 13, 2011 Haven't had a lot of time to work on the car itself but it now has a home to live in for the time being I plan on getting crates for the base and putting plywood on those to allow for a dry, flat surface to work on. More updates soon! Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-366311 Share on other sites More sharing options...
R_3 Posted September 27, 2011 Share #48 Posted September 27, 2011 Let the fun begin! Link to comment https://www.classiczcars.com/topic/35246-complete-resto-240z-project/?page=4#findComment-367559 Share on other sites More sharing options...
motorman7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now