Jack Stand location pictures

[dawg7]

From a newb for the newbs...........this is where I put my jackstands. Lifted the car using a floor jack at the rear diff and the front cross member. I didn't take a pic of the right rear because the strut was still in the way. I put that jackstand at the exact location as the left. There is still clearance for the removal of the rear stabilizer. barely.............

[Inf]

I've always used the spots recommended in the Nissan Factory Service Manual (they're different from yours).

See the pdf attached to this post:

http://www.classiczcars.com/forums/showpost.php?p=194989&postcount=3

[LeonV]

I've always used the spots recommended in the Nissan Factory Service Manual (they're different from yours).

See the pdf attached to this post:

http://www.classiczcars.com/forums/showpost.php?p=194989&postcount=3

Same here, never had a problem.

[dawg7]

I was hesitant with the FSM spots due to that area being damaged by previous jacked up jacking..... but I went ahead and moved the rear. The front location was recommended by a Z car guru of some sorts. Will relocate the front to the FSM spots on the next maintenance routine.

Thanks!

Edited November 13, 2010 by dawg7