KiraK Posted June 19, 2016 Share #145 Posted June 19, 2016 7 hours ago, Travel'n Man said: After 8 years of the same wheels - I thought it was time for a change........ Wow! Beauty! K 1 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-497148 Share on other sites More sharing options...
Travel'n Man Posted June 19, 2016 Share #146 Posted June 19, 2016 8 hours ago, siteunseen said: Are those some of the satin black Rewinds MSA has? They look fantastic! http://www.thezstore.com/page/TZS/PROD/classic05a01/25-1209 Watanabe's from Japan - took almost 5 months to get them from the time I ordered them until they finally got though customs and got shipped to me. Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-497152 Share on other sites More sharing options...
siteunseen Posted June 19, 2016 Share #147 Posted June 19, 2016 1 hour ago, Travel'n Man said: Watanabe's from Japan - took almost 5 months to get them from the time I ordered them until they finally got though customs and got shipped to me. Worth the wait! They look super. 8^) 1 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-497153 Share on other sites More sharing options...
gnosez Posted June 19, 2016 Share #148 Posted June 19, 2016 For non-vintage events, original BSR wheels with Hoosiers (Scotty Sharp was the last person to run them before I got them), 15X7s BSR w/Toyo RA1s for vintage (dry) and the white panasports w/RA1s (wet). At least two of these sets will get a work-out this coming week. Instructing on Wednesday (Hoosiers) and then the VRG event at Thompson, CT which looks like no rain in the forecast (6/23-25). Four 240Zs have signed up, along with 911s, Alfas and a very sorted out 142 Volvo. Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-497154 Share on other sites More sharing options...
grannyknot Posted August 6, 2016 Share #149 Posted August 6, 2016 Well these aren't my wheels but since I'm in the market for new wheels and happened to be at the big ZCON car show in Toronto today I thought I would share some of the selection I saw today. Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-500395 Share on other sites More sharing options...
KiraK Posted August 10, 2016 Share #150 Posted August 10, 2016 On March 22, 2016 at 4:12 PM, theblackpearl said: Sorry posted too soon appliance fine wire wheels powder coated to match my black pearl. I have center caps but 1 fin is broke off of 1 of them Do you still have your center caps? If so, are u interested in selling them? Lmk.. big thanks! K the lil z lady Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-500668 Share on other sites More sharing options...
240ZX Posted October 22, 2016 Share #151 Posted October 22, 2016 Hi all....I believe you can fit a broad choise of wheels/tires to fit your 240Z. (Take a look at my set-up, 240ZX photo album), these are 17x8 front & 17x9 rear with 215-40 front & 235-40 rear within stock body. What i did was calculate, this does take some work, width vs offset and researching tire sized and finally coming to the a result of width thick spacer is required to allow the combination to work without problems. For my set-up I also had to install longer studs as the studs pass through the spaces. If you have the passion for a non standard set-up, it is possible. OK, there are limits! Note: my struts have been shortened and I have adjustable camber plates. As always, this is a contiual improvement process. I am working on the front end to reduce bump stering.....not bad but want better. HYBRIDZ has tons of info about how to achieve this effort. I have a front crossmember with relocated lower control arm pivot points and will install adjustable length control arms. Always something to mod!!! Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-505342 Share on other sites More sharing options...
bonsi Posted October 23, 2016 Share #152 Posted October 23, 2016 Sent from my iPhone using Classic Zcar Club mobile 2 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-505392 Share on other sites More sharing options...
Mike Posted November 28, 2016 Share #153 Posted November 28, 2016 On 6/19/2016 at 4:33 AM, Travel'n Man said: After 8 years of the same wheels - I thought it was time for a change........ Hey @Travel'n Man, what are the specs for this setup? Wheels and tires if you could, thanks. 1 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-507082 Share on other sites More sharing options...
7tooZ Posted November 29, 2016 Share #154 Posted November 29, 2016 New BRE libre style 16x7 made by VTO 2 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-507098 Share on other sites More sharing options...
Travel'n Man Posted November 30, 2016 Share #155 Posted November 30, 2016 (edited) On 11/28/2016 at 3:48 PM, Mike said: Hey @Travel'n Man, what are the specs for this setup? Wheels and tires if you could, thanks. @Mike - the wheels are Watanabe's. Fronts are 15X7 I believe 1+offset. Rears are 15x7.5 1+ offset. I tried to get as close to ZERO offset as I could. On my original order I requested Semi-Gloss but once I got them 3 months later it was just a little too much gloss for me. I sent them to my local powder-coater and had them done if flat black. The picture above is semi-gloss. Due to the big brake calipers I do have to run a spacer in the front (it's about 1/2" give or take) - they are 205x15's. The rears have no spacers and they are 225/15. Hope that helps - let me know if you need exact detail on the spacers and tires sizes. Be happy to supply if needed. The below pictures are of the re-powder coat flat black - same color as the rear panel and rear shade. Still have my old wheels just in case I want to change the look at any time. Edited November 30, 2016 by Travel'n Man 2 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-507185 Share on other sites More sharing options...
Zedyone_kenobi Posted January 23, 2017 Share #156 Posted January 23, 2017 Your car has always been something I just stop and stare at. Every. Single. Time 3 Link to comment https://www.classiczcars.com/topic/40131-the-official-post-pictures-of-your-wheels-thread/?page=13#findComment-510926 Share on other sites More sharing options...
motorman7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now