Help me to indentify these CVs

[lubu]

Does anyone know what Z those cvs came from? They look a bit long for the 280zxt's, Im thinking of the z31 NA cvs but Im not sure, could be z32? The reason I ask is I want to source the bolts for the cv to the flange. Thanks

[cygnusx1]

They LOOK like 280 ZXT half shafts. The flange bolts are probably 8 or 10mm metric. You can probably get them at any hardware store.

[jmortensen]

The 300ZX NA shafts and 280ZXT shafts look very similar. The problem is that the 300ZX NA shafts are way too long to fit in the car. There is a guy on HybridZ who talked about cutting them down and resplining the shaft. I'm a bit wary of his measurements, but it would be something to look into if you were putting these in an S30.

http://forums.hybridz.org/index.php/topic/100094-cv-axle-discussion/page__view__findpost__p__951914

[lubu]

Thanks guys, I'll confirm after when they are here. As for the bolts, should I order them from Nissan or any high tensile bolts will do?