AndysPlit Posted December 30, 2011 Share #1 Posted December 30, 2011 Are there any pointers to this procedure? I am hoping my Haynes manual at home has this in it. I heard that generally I need to pry off a couple bolts? Thanks! Link to comment https://www.classiczcars.com/topic/41783-about-to-remove-ignition/ Share on other sites More sharing options...
EScanlon Posted December 30, 2011 Share #2 Posted December 30, 2011 Not pry off, you'll have to notch them in order to use a straight screwdriver or use an awl to edge-hit the screw off. They're security screws and the heads have been snapped off, leaving a "blank" screw head.The simplest procedure is to use a Dremel tool to cut a notch in the head of the "blank" screw, then use your straight screwdriver to remove the screws (2).HTHE Link to comment https://www.classiczcars.com/topic/41783-about-to-remove-ignition/#findComment-375814 Share on other sites More sharing options...
FastWoman Posted January 1, 2012 Share #3 Posted January 1, 2012 (edited) You can also use a bolt extractor bit. Just drill a little hole in the head, insert the bit, and turn. (It's not as easy as that, but if you have the bolt extractor set and not the dremel tool...) Edited January 1, 2012 by FastWoman Link to comment https://www.classiczcars.com/topic/41783-about-to-remove-ignition/#findComment-375959 Share on other sites More sharing options...
zKars
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now