Reproduction S30 parts NLA.......

[mgood]

Mike,

Attached is a picture of the cover that controls the seat back mechanism. It is black plastic. I need one for 11/75 - 76 -280Z. It is different than 77 but could be same as 240 type II seats.

I need one for the passenger side. If any one knows where I can get one let me know.

Thanks.

[jonathanrussell]

I second the request for 75 and 76 rubber bumper pieces.

[Lee Ehinger]

How about the white plastic male / female wiring harness connectors? They discolor and become brittle.

[AZ-240z]

How about the white plastic male / female wiring harness connectors? They discolor and become brittle.

Check out Banzai Motorworks, Banzai Motorworks

[LeonV]

Check out Banzai Motorworks, Banzai Motorworks

Or Vintage Connections...

[Lee Ehinger]

thanks for the leads!

[EuroDat]

Hi Mike, We have been discussing the plastic inner fender panel for the 280Z in a thread started by GC240Z.

I think they would be a good option for reproduction.

See thread

http://www.classiczcars.com/forums/body-paint-s30/50408-280z-plastic-inner-fender-question.html

Chas

[an_unusual_eye]

i'd be in for a set of tail light trim an am radio face plate... as well as a set of "DATSUN" thresholds and a new early gas cap...

[AZ2NV]

240z heater fan knob

240z heater fan knob screw

[mgmoreau]

Mike,

Attached is a picture of the cover that controls the seat back mechanism. It is black plastic. I need one for 11/75 - 76 -280Z. It is different than 77 but could be same as 240 type II seats.

[ATTACH=CONFIG]63953[/ATTACH]

I need one for the passenger side. If any one knows where I can get one let me know.

Thanks.

Hi Michael,

Mike McGinnis from Banzai Motorworks already has a reproduction seat reclining mechanism cover for the 240Z's. I do not know if the covers changed for the 260 and 280.

[Taz0162]

So... 9teen7t240zwhat ever happened to having 240z Taillight bezels?

[Kurbycar32]

I had to make my own:

https://sites.google.com/a/thecomputerrehab.com/260z/Interior/heater-plumbing