1972 Float Adjustment ...

[240260280]

hi

Edited July 13, 2018 by 240260280

[Mark Maras]

@jalexquijano I'm assuming you mean it won't start without using the choke? Will it start using 1/2 choke or even 1/4 choke? You may not need full choke to start it. Too much choke, even for a few minutes, can carbon up the plugs and exhaust. How well is running these days when it's warm? Any more problems with #4 or did the cap and rotor fix it?

[gundee]

So you still have a dead cylinder on number 4? You did not mention any changes or repairs to that cylinder.

[Mark Maras]

@Lumens He didn't mention #4 still having problems. I asked about #4 just to satisfy my curiosity.

[siteunseen]

I think it would be a good gesture, to all who help, to take out all six plugs and post a picture Jalex.  

[Mark Maras]

1 hour ago, siteunseen said:

I think it would be a good gesture, to all who help, to take out all six plugs and post a picture Jalex.  

 and we promise we'll try our best not to tell you to go buy more new plugs.

[gundee]

6 hours ago, Mark Maras said:

@Lumens He didn't mention #4 still having problems. I asked about #4 just to satisfy my curiosity.

I know. We both typed a reply at Exactly the same time. I saw yours after I submitted mine.

Bad #4 cylinder plug.. No compression test report on it. All rest of cylinders were reported at 100 psi.

Does not compute.

[Zed Head]

On 2/6/2018 at 4:01 PM, jalexquijano said:

Where do i purchase a new set of high quality needle valves for my 3 screws su carbs? 

4 1/2 year necro post started it all.  4 1/2 months and 26 pages later...it continues.  The internet.

[Johnny wick]

Please calm down. I will test the car tomorrow now with the new rotor and cap

[240260280]

Jalex we got your back.   This is a very long process but you are in a very hot and humid area that most of us do not have to contend with.

 

Please post a few pictures of your Z.  I think it is beautiful!

Edited July 14, 2018 by 240260280

[Johnny wick]

Thanks guys. I took the car out for a spin yesterday after performing the following:

1.  pulled the choke to 1/2 the lever in order for the car to crank.

2. Let the car warm for a minute after taking it out from the garage.

3. Drove it gently until the temp needle got near to 1/2

4. Started stepping on the gas to achieve more speed.

Results:

1. No backfire either on the intake or exhaust.

2.  Cruises nice although i would prefer a faster response when accelarating from 1st gear. How can i accomplish this or is it the nature of the beast?

Will pull all 6 plugs out today.

[siteunseen]

Calmly, did you swap out the cap and button before this "spin"?

Also, very gently, are you happy with performance? 

I think you've achieved a nice balance of performance and reliability thanks to Mark Maras!

Dark chicken and pepper jelly...

wowlsaze, wowlsaze!