Careless Posted May 26, 2016 Author Share #25 Posted May 26, 2016 On 5/10/2016 at 6:06 AM, Namerow said: I have templates made from my 5/70. Also took photos of the old pieces as they came out of the car. Exception is the large piece for the cargo-area floor, which was missing (I think I might have a template for this piece made years ago from a 72 I used to own). I'm busy all week. Might have time to dig these out on the weekend. I'm in Burlington. On a separate note, Grannyknot suggested that you might have a spare 70-71-type brake master cylinder. True? Message me and we can discuss further. I'm going to visit Grannyknot sometime this week (perhaps tonight if I finish a side-job early). I'll have to double check which brake masters I have at the shop- I know I got two, haven't quite looked at the differences between 'em yet. Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-495748 Share on other sites More sharing options...
Careless Posted March 31, 2017 Author Share #26 Posted March 31, 2017 (edited) Back at this topic again. I'll update the build thread of the car after I finish some more interior stuff, but I was wondering if anyone has opinions on who makes the best upper vinyl pieces around the headliner, as well as the side-sill vinyl. the NOS side sill ones I have are N4200 series parts and there are some holes and slots that are for later models, not early 70s ones. The upper pieces... thought I had them.. but I don't. headliner is about to go in, i gots one of those... Any recommendations? I was thinking Classic Datsun... Edited March 31, 2017 by Careless Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-516874 Share on other sites More sharing options...
Warty Posted July 23, 2017 Share #27 Posted July 23, 2017 I'm in a very similar situation to Careless: trying to restore a 1970 Z to close-to-factory. Careless, what did you do for the template for the Jute? I am going to order a 54" roll from the TRF site. Two other questions: Does anyone have a picture of what the steel spring attachments look like, and how they attach to the floor behind the seats? A lot of "work" happened to the interior of my Z, I can't really trust anything I see in it. Did i understand right that the male snaps for the front are attached directly to the firewall insulation part? (mine wasn't original, and didn't have snaps, was all re-done by some upholstery shop). Any pictures of that? I have to secure a new firewall insulation kit anyway, and get put snaps on it. Seems like squishy material to have snaps pull on it, but maybe not a lot of tension happens. Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-526396 Share on other sites More sharing options...
Warty Posted July 23, 2017 Share #28 Posted July 23, 2017 nevermind question #2 up there, I found the right thread, with lots of pictures and info: Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-526401 Share on other sites More sharing options...
Warty Posted July 23, 2017 Share #29 Posted July 23, 2017 And to complete the nevermind bit, here is info on the metal carpet clips: https://zcardepot.com/interior/carpet-sets/carpet-anti-slide-clip-set-240z-260z-280z.html ($40) The forum post has a clipping of the service bulletin. It looks to me like they were not there for 1970s Zs, but probably needed them, hence the change. I would guess some folks' dealers installed them for them after the fact. Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-526408 Share on other sites More sharing options...
Warty Posted July 23, 2017 Share #30 Posted July 23, 2017 And, finally, to REALLY complete it, here is a 10-year thread with a full discussion of the jute, and, on page 5, a PDF you can download with a 1970-71 Jute pattern. Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-526409 Share on other sites More sharing options...
Warty Posted May 29, 2023 Share #31 Posted May 29, 2023 The above link to Z depot's carpet slip-stopper springs is no longer valid, here is the current one: https://zcardepot.com/products/carpet-anti-slide-clip-set-240z-260z-280z?_pos=6&_sid=736ad8d62&_ss=r Price is $41 at the time of this post. Link to comment https://www.classiczcars.com/topic/53352-order-of-base-interior-parts/?page=3#findComment-653976 Share on other sites More sharing options...
motorman7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now