Mech Fuel pump insulator

[footballnick17]

I lost the insulator/spacer that goes where the fuel pump is, how can I make one, and do I absolutely need it?

 

 

Sent from my iPhone using Classic Zcar Club mobile

[zKars]

You need it for proper spacing of the pump arm. It also serves as a heat insulator.

You could make one, I can tell you the exact thickness. I'd send you one, but I'm down to almost none at the moment. Let me look. Gott help a fellow Canuck....

Edited November 8, 2017 by zKars

[footballnick17]

You need it for proper spacing of the pump arm. It also serves as a heat insulator.
You could make one, I can tell you the exact thickness. I'd send you one, but I'm down to almost none at the moment. Let me look. Gott help a fellow Canuck....

Yes thank you!


Sent from my iPhone using Classic Zcar Club mobile

[zKars]

Well with the gaskets one spacer has on both sides, the total width is very close to 0.25 inches. A completely bare and new one I have is 0.222 thick.

If you want one, PM me or email to z240@shaw.ca

 

[w3wilkes]

I got one of these last year when I broke mine trying to remove it. Got it from;

Richard Lowell

CHAOS Racing & Datsun Speed

5652 East University Drive

Mesa, AZ 85205

Phone: 480-892-9290

Email: 510doc@cox.net

http://desertdatsuns.com

You could try reaching out and see if he has more.

Edited November 14, 2017 by w3wilkes