Jump to content

Recommended Posts

I found a capable local guy that should have no problem rebuilding my 70 series one engine.  Is there anything I can provide him that will assist in his success.  He said he has no problem getting parts, and building the engine, but I'd appriciate any information that might be useful.  I've already got a document that has links to everything Z related. I probably got that here. 

 

Link to comment
https://www.classiczcars.com/topic/64997-local-engine-builder/
Share on other sites


47 minutes ago, z8987 said:

True


Sent from my iPhone using Tapatalk

Seriously though. I just thought of a headache he may run into. The 240 engine bay motor mounts are a little different than the 280's. The locating pin is diffetent. Check yours if you've bought them already, if not read around and get the good ones. I'll try and find that discussion.

@EuroDat has the Nissan p/n on his reply, post #21.

Whoa! $107 each. That pallet of money just got smaller. LOL

 

Edited by siteunseen
1 hour ago, siteunseen said:

Seriously though. I just thought of a headache he may run into. The 240 engine bay motor mounts are a little different than the 280's. The locating pin is diffetent. Check yours if you've bought them already, if not read around and get the good ones. I'll try and find that discussion.

@EuroDat has the Nissan p/n on his reply, post #21.

Whoa! $107 each. That pallet of money just got smaller. LOL

 

$67 here:  https://zcardepot.com/products/engine-motor-mount-oem-240z-260z-280z-280zx?_pos=5&_sid=d972a746c&_ss=r

7 minutes ago, texasz said:

Hopefully those will work but for me the research i did showed that anything that was not specific to 240Zs were considered universal fit. Those do not work without some grinding, modifying of the pins. The ones you show are for 1970 to 1983.

25 minutes ago, siteunseen said:

Hopefully those will work but for me the research i did showed that anything that was not specific to 240Zs were considered universal fit. Those do not work without some grinding, modifying of the pins. The ones you show are for 1970 to 1983.

Hmmm...I'm not sure.  These are OEM though, in the first picture you can just see the corner of the Nissan logo on the sticker (red arrow) and the second picture I just took of one of the ones I received from them a couple months ago.

 

image.png

 

image.png

32 minutes ago, texasz said:

Hmmm...I'm not sure.  These are OEM though, in the first picture you can just see the corner of the Nissan logo on the sticker (red arrow) and the second picture I just took of one of the ones I received from them a couple months ago.

 

image.png

 

image.png

Here is some info about interchangeability of part number 11220-N3300 from the Nissan parts book:

Capture 4.JPG

The "N" in the ICA columns means not interchangeable. Here is an explanation of the columns from the Datsun 521 pickup parts book.

Capture 3.JPG

  • Like 1

The aftetmarkets I bought would not work without modifying. Anything that list '70-'83 almost certainly will need to be ground down, modified in my experience.

You can't go wrong with Nissan parts. You get what you pay for so you get a lot with OEM parts, they're high like a giraffes arse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1,385 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.