Wanted: Original hose clamps

[VaCat33]

Hello

i am looking for original hose clamps for my 1972 240z...the type with the ROUND HEAD Phillips screw. See photos. 
I need the 1/4 and 5/16” for the fuel lines and the four clamps for the upper and lower radiator hoses.

Thanks

Jim

 

[S30Driver]

Aside from sourcing original clamps and having them re-plated. there are limited choices for correct originality.

@Zupis a expert on the oem clamps, maybe he will comment on his sources.

[Patcon]

Didn't motorman7 have an Ebay source?

[S30Driver]

3 minutes ago, Patcon said:

Didn't motorman7 have an Ebay source?

I think you are right Charles, only issue is the larger sizes have a hex head and slot as opposed to round with jis / philips style head.

[VaCat33]

I have the hex head style clamps...they are readily available, but I have been assured by a reputable Z restorer that the round head Phillips screw is correct for the radiator hoses.

[inline6]

I may have what you need, both fuel and otherwise.  Do you have an original fuel one to look at?  They differ in style from the larger clamps.  Here is what the ones on my car's fuel lines look like, though they were silver in color from the factory:

  

[VaCat33]

Inline6

i assume the clamps you have pictured are Phillips head. Cannot really tell from the photo. Let me do some more checking and I will get back.

Thanks

Jim

[inline6]

Yep. They are.

[zed2]

Delete

Edited June 14, 2021 by zed2

[VaCat33]

Keith

 

Thanks for the response. I do not believe the gold plating is correct for my 72, so I will pass. If you have any silver clamps let me know.

Jim

[inline6]

2 hours ago, VaCat33 said:

I do not believe the gold plating is correct for my 72, so I will pass. If you have any silver clamps let me know.

Yep. They were originally silver, and I will be re-plating mine to silver instead of gold.  Jim, if you confirm fuel pump clamp style, let me know.  I have many different size OEM clamps in silver that I stripped from Datsun's years ago.

[VaCat33]

Here are some shots I took today. I am told these clamps are correct ECXEPT they are the newer hex head style. All else would be same but PAN head. I believe there are three different size clamps for the fuel lines at the fuel pump. The hoses are 5/16th, 1/4 and 3/16 OD, I believe. Thanks