How do I test power to wiper motor??

[Shawninvancouver]

No power at switch.   I did always have power at switch.  Are you talking here.  ?? I always had power on red blue. But no power there now.   

[Shawninvancouver]

what is this red blue???? used to have power all the time and now not...

[Patcon]

Check the fuses. If the motors bound up and you left it on, it probably blew the fuse

[Shawninvancouver]

Fuse is ok.  Apparently other wires on plug are grounds. So I need to hook + up to those holes with test light to see what’s going on. I thought all those wires would be hot. 

[Zed Head]

Not sure which side of the harness you're looking at.  Remember that the switch harness colors probably don't match the main harness colors.  Here's a better diagram.

[Shawninvancouver]

 id like to just do the honda motor swap but i am having a hard time finding instructions on a 6 wire swap.. all 240s are 5 wires and i have a 6 wire 260 plug.. any ideas.. and do i have to disconect the relay for intermitent?

[grannyknot]

Google, 240z honda wiper motor swap

[Shawninvancouver]

I have a 260.  6 wire plug. Not a five wire like the 240.  Is the 260z six wire plug the same as a 280 wiper plug?

[Shawninvancouver]

does the wiper switch ground the wiper motor? so when i test it i should hook  my test light up to the + on the battery and see if certain grounds will complete the cicuit in the wiper plug???  previously i was thinking i would see power on the wiper plug --

[Yarb]

That’s a continuity test using a meter. Are you familiar with the use of a multimeter? Again that’s the only way to get true readings.

[Shawninvancouver]

I’m no expert.  I do have a multi meter. Do I put pos to pos and check the grounds on plug? Look for what reading ??

[Yarb]

Google a you tube video on using a multimeter. Your looking for how to perform a continuity test and dc voltage testing. That will give you help on doing tests. If you have questions after that post them here and we can help you with testing.