SteveJ Posted August 21, 2021 Share #13 Posted August 21, 2021 As @Terrapin Z said, the tab for the lower mount needs to be turned up. Look at about 1:09 in the video. Here's a closer photo, but the wiring for the headlights obscures it a little. 1 Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627326 Share on other sites More sharing options...
CanTechZ Posted August 21, 2021 Share #14 Posted August 21, 2021 Here's a couple of pics with measurements that might help, my grill is out. Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627327 Share on other sites More sharing options...
SteveJ Posted August 21, 2021 Share #15 Posted August 21, 2021 Well that's interesting. It appears as though the 73 (my car) has a slightly different grille as the mounting tabs on my car clearly bend up. And...the parts catalog bears that out: 62300-E4601 is for the 70-72 and 62300-N3301 is for the 73. The different grille accommodated the 73's bumper mounts. Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627328 Share on other sites More sharing options...
CanTechZ Posted August 21, 2021 Share #16 Posted August 21, 2021 That is interesting. Quite a few differences over the years. Easy to tell the bend direction by which side the nut is welded to. Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627329 Share on other sites More sharing options...
Patcon Posted August 21, 2021 Share #17 Posted August 21, 2021 It looks like his tabs are on upside down. When he bends them up the nuts will be on the front facing side of the tab. Not on the rear side like the examples Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627331 Share on other sites More sharing options...
Terrapin Z Posted August 21, 2021 Share #18 Posted August 21, 2021 The tabs do look as if they were welded back on, perhaps upside-down. There should only be the two spot welds, and not the three glob welds on the edges. Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627332 Share on other sites More sharing options...
CanTechZ Posted August 21, 2021 Share #19 Posted August 21, 2021 16 minutes ago, Patcon said: It looks like his tabs are on upside down. When he bends them up the nuts will be on the front facing side of the tab. Not on the rear side like the examples I think Wally's car is a 1971 so he will be bending the tabs down and the nut will be correct. @Wallycan you confirm that. Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627333 Share on other sites More sharing options...
Wally Posted August 21, 2021 Author Share #20 Posted August 21, 2021 (edited) yes 1971. I did bend upward. I did have to make some "Adjustments" to get them to fit snugly but its all on tight now. The hole was too high so i made a new hole lower. Edited August 21, 2021 by Wally 1 Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627336 Share on other sites More sharing options...
grannyknot Posted August 22, 2021 Share #21 Posted August 22, 2021 15 hours ago, Wally said: man, i said that but i dont drink either. Havent had a drop in about 8 years. Had too much Wild Turkey when younger, now no urge for any of it HA, It's been 7 yrs for me and Wild Turkey was also my poison of choice too. Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-627349 Share on other sites More sharing options...
siteunseen Posted September 5, 2021 Share #22 Posted September 5, 2021 On 8/21/2021 at 7:41 AM, Wally said: man, i said that but i dont drink either. Havent had a drop in about 8 years. Had too much Wild Turkey when younger, now no urge for any of it On 8/21/2021 at 8:31 PM, grannyknot said: HA, It's been 7 yrs for me and Wild Turkey was also my poison of choice too. I've gone a week with no alcohol, beer for me. I quit vodka about 9am New Year's morning 2006. Girls and drugs all over the place and I wanted to go to sleep, alone. Anyhow this past week I've gotten so much stuff done I may try this a little longer. It is football season and I'm an Alabama guy so maybe Saturday's only? Thank you both for ringing my bell. 3 Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-628107 Share on other sites More sharing options...
grannyknot Posted September 5, 2021 Share #23 Posted September 5, 2021 1 hour ago, siteunseen said: I've gone a week with no alcohol, beer for me. I quit vodka about 9am New Year's morning 2006. Girls and drugs all over the place and I wanted to go to sleep, alone. Anyhow this past week I've gotten so much stuff done I may try this a little longer. It is football season and I'm an Alabama guy so maybe Saturday's only? Thank you both for ringing my bell. Good for you Cliff, a week is a long time if it's your daily routine. I did the numbers, I was spending $6,500.00 per year to support my liquid recreation, now I just buy more car parts. 3 Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-628111 Share on other sites More sharing options...
Mark Maras Posted September 6, 2021 Share #24 Posted September 6, 2021 Early to bed and early to rise, your girl goes out with other guys. 2 Link to comment https://www.classiczcars.com/topic/65738-hood-spring-assembly/?page=2#findComment-628116 Share on other sites More sharing options...
slogan5
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now