Patcon Posted August 8, 2023 Share #61 Posted August 8, 2023 I love fresh paint!! Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-655739 Share on other sites More sharing options...
dar5052 Posted December 13, 2023 Author Share #62 Posted December 13, 2023 I’ve spent more time than I wanted in India so progress has been slow. I decided to work on the interior and happy with the results so far… you don’t realize how much you took apart until you start putting it back together… the widow frames/mechanisms were a PITA. they still don’t seem right but I’ll save that for another day. Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660158 Share on other sites More sharing options...
Patcon Posted December 13, 2023 Share #63 Posted December 13, 2023 9 hours ago, dar5052 said: I’ve spent more time than I wanted in India so progress has been slow. I decided to work on the interior and happy with the results so far… you don’t realize how much you took apart until you start putting it back together… the widow frames/mechanisms were a PITA. they still don’t seem right but I’ll save that for another day. Any pointers for the leather interior? I am about to start this same work Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660162 Share on other sites More sharing options...
dar5052 Posted December 13, 2023 Author Share #64 Posted December 13, 2023 10 hours ago, Patcon said: Any pointers for the leather interior? I am about to start this same work Perhaps a couple… first is the order. I did shock tower, wheel wells, and lastly that back panel. Turned out well because each section covers the pervious. When I first test fit them I thought I was screwed but once you actually glue them down, they take shape. I used 3M spray on adhesive. That worked well. Spray both surfaces, let them tack up and install. For the shocks, start at the top and line up the lip that goes around the rounded section and then just pull the rest down and try to stretch the material as much as it will go without creating creases. I had to make some relief cuts at the bottom but they won’t be seen since they will be under the carpet. You may need relief cuts on the wheel wells too. I have some but they won’t be visible. Make sure to line everything up and you’re happy with the figment before making any cuts. I found it useful to have my seatbelts and seatbelt covers close by since they mount onto my shock tower. This gave me a good visual to compare from side to side as far as equal alignment on the shock tower. Lastly, the glue isn’t permanent so don’t be worried about pulling a panel off after it’s installed… I did my passenger shock tower about 3 times until I was happy with it. And I might redo my driver too. Hope that helps… 2 Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660182 Share on other sites More sharing options...
Patcon Posted December 14, 2023 Share #65 Posted December 14, 2023 Thanks, yes, very helpful! Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660183 Share on other sites More sharing options...
dar5052 Posted December 18, 2023 Author Share #66 Posted December 18, 2023 Does anyone have any suggestions for the front and rear glass molding? I have the original molding that I can install but given that it’s so thick/bulky, I am looking at other options. I am thinking to just put the glass down on urethane and have a rubber molding to trim out the edge. I think I have enough contact between the glass and seam to get a decent bead of urethane down but I’ll have my glass guy confirm. My question is more around the molding and if anyone has done this and can comment on the results. My glass guy gave me a sample of what he has…. Pic below. He would make relief cuts at the corners but I think it could work… Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660307 Share on other sites More sharing options...
Patcon Posted December 18, 2023 Share #67 Posted December 18, 2023 I would go original or California style. Wouldn't want to try to design a new system 1 Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660309 Share on other sites More sharing options...
dutchzcarguy Posted December 18, 2023 Share #68 Posted December 18, 2023 (edited) 7 hours ago, dar5052 said: I have the original molding I would use that.. just use some soapy water to install it.. One day you want to sell the car, it would be bad if it wasn't original.. Edited December 18, 2023 by dutchzcarguy Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-660321 Share on other sites More sharing options...
dar5052 Posted January 15, 2024 Author Share #69 Posted January 15, 2024 Can someone help in telling me where these connectors are supposed to go? The two white wires come off the ecu. The other connector is under the passenger seat. Thanks in advance. Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-661090 Share on other sites More sharing options...
Zed Head Posted January 15, 2024 Share #70 Posted January 15, 2024 They just hang there. "Checking" terminals. Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-661091 Share on other sites More sharing options...
dar5052 Posted January 15, 2024 Author Share #71 Posted January 15, 2024 Thank you @Zed Head your wiring diagram is much better than i have in my Haynes.... Now just need to get the other one sorted and I can install my carpets. Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-661095 Share on other sites More sharing options...
Zed Head Posted January 15, 2024 Share #72 Posted January 15, 2024 There is a lot of downloadable stuff on the site. https://www.classiczcars.com/files/ https://www.classiczcars.com/files/category/1-wiring-diagrams/ 1 Link to comment https://www.classiczcars.com/topic/66062-new-to-me-280z/?page=6#findComment-661096 Share on other sites More sharing options...
motorman7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now