Windshield wiper water pump replacement

[Johnny wick]

Id like to source a good wiper water pump for my 72 240z. Something that fits correctly and has gas enough power to spray the windshield. This is the one i have and is currently shot. Im also attaching a picture of the one i found on the web.

[Yarb]

Did you test it with jumper Leeds straight from the battery? 

 

[psdenno]

1 hour ago, jalexquijano said:

Id like to source a good wiper water pump for my 72 240z. Something that fits correctly and has gas enough power to spray the windshield. This is the one i have and is currently shot. Im also attaching a picture of the one i found on the web.

 

 

If your pump fails the electrical test Yarb recommends and your pump is dead, replacements are available on Amazon:  https://www.amazon.com/ACI-177510-Windshield-Washer-Pump/dp/B000CEN2OK/ref=sr_1_4?dib=eyJ2IjoiMSJ9.8sIz-JyDouorpuyV73LJGApCXSnIcESJdEAuzfZjL6rENSgwS7oSiVl-b-R0qZM-bxU_wHyiykdwdDs76tM6YTm9JSfu6l8nX3Ws9itlpXw.qIJ1MJ9DZAz_O78dgBolSY0D-EDnP4-JmyLTOHvDdLo&dib_tag=se&qid=1714416653&s=automotive&sr=1-4&vehicle=1971-67-2284-20-----14492------1&vehicleName=1971+Nissan+240Z

[Johnny wick]

Water pump is fine. I had removed the dome light fuse and thats it didnt work. Now its back in commission. 

[Patcon]

Always test before replacing! That's true here much less in central America where parts aren't as plentiful!

Im glad you found it! 😁

[Johnny wick]

Tks Patcon. Now i need to fix the blue hi beam light and determine the exact position of the ts switch so the horns make contact precisely.

[Patcon]

I would unplug the bulb and test for voltage at the socket. If there's good voltage its probably the bulb. If there's no voltage it's somewhere else.

[Johnny wick]

How do i get into that small hole from behind? Its really stretch for someone like me that is 6 feet tall. 

[Johnny wick]

On 4/29/2024 at 12:51 PM, Yarb said:

Did you test it with jumper Leeds straight from the battery? 

 

Pump is good. i mistakenly removed the Dome fuse from the circuit and it cease to work. Only 2 remaining matters to be solved: 

1. The high beam blue led light in the speedometer.

2. The correct position i have to place the t/s switch so it engages both horns when i press horn pad. 

[Yarb]

Remove the tach